DEA MOUNTS A6238 front engine mount for the 1989-1992 Toyota Cressida 6-cylinder 3.0L helps support and locate the engine and isolate vibration. The catalog lists it for both the front left and the front right position.
- Steel and rubber mount material
- Solid mount category
- One stud and two mount holes
- Standard grade type
Quick facts
- Part: DEA MOUNTS A6238 engine mount
- Fits: 1989-1992 Toyota Cressida 6-cylinder 3.0L
- Position: Front left, front right
- Material: Steel and rubber
- Condition: New
A worn engine mount can show up as a clunk on acceleration, deceleration or shifting, vibration at idle, or cracked or separated rubber. Those signs can also come from other parts, so before ordering, look at the rubber with the engine off and cool for cracks or splits where it meets the steel.
Fits
This mount fits the 1989-1992 Toyota Cressida 6-cylinder 3.0L. The car takes one at the front left and one at the front right. This listing is a single mount, so order two; the two are normally replaced together.
Specifications
Fit and size
- Position: front left, front right
- Quantity per vehicle: one per side
- Stud quantity: 1
- Mount hole quantity: 2
- Engine: L6-3.0L
Build and materials
- Mount material: steel and rubber
- Mount category: solid
- Grade type: standard
- Condition: new
- Country of origin: Thailand
In the box
One engine mount with mounting hardware.
Interchange: EM-8344
8344 · 608344 · 1236142040 · 1236142060 · 1236170151
This part cross-references / interchanges with the following part numbers:
8344, 608344, 1236142040, 1236142060, 1236170151, EM-8344
Frequently Asked Questions
Does the DEA MOUNTS A6238 engine mount fit the 1989-1992 Toyota Cressida 6-cylinder 3.0L?
Yes. DEA MOUNTS A6238 is listed for the 1989-1992 Toyota Cressida 6-cylinder 3.0L, and the catalog gives both the front left and front right positions.
Does the A6238 engine mount come with mounting hardware?
Yes. Hardware is included with the DEA MOUNTS A6238 engine mount, so the listing is the mount and its hardware.
Is the A6238 a solid engine mount?
Yes. This engine mount is listed as a solid mount and is made of steel and rubber, with one stud and two mount holes.
How do I know if a steel-and-rubber engine mount like this is worn?
Signs that can point to a worn mount are a clunk on acceleration, deceleration or shifting, vibration at idle, and cracked or separated rubber.
Does the A6238 engine mount replace EM-8344?
Yes. EM-8344 is one of the numbers the DEA MOUNTS A6238 replaces. The other cross-reference numbers are on the Interchange line of this page.
