DEA MOUNTS 4713603 front shock absorber mount for the 2011-2016 Ram 2500 and other vehicles holds the upper end of the shock absorber to the vehicle.
A worn suspension shock absorber mount can show up as a clunk or rattle from the front end over bumps, or as cracked rubber at the top of the shock. A tired shock can make similar noises, so with the engine off, look over the mount rubber and the shock for cracks or leaks before you replace anything; if the mount is the cause, this replaces it. These vehicles take two, one on each side of the front axle, so order two and fit them together.
Vehicles on its fitment list include the 2011-2016 Ram 2500, the 2011-2012 Ram 1500 and the 1994-2010 Dodge Ram 2500. If your vehicle is not named here, look up its year and model on the Buyer's Guide tab.
Fit and size
Build and materials
One shock absorber mount with a bushing and a washer. Bolts, nuts, an insulator, a bearing, a spacer, a sleeve, a snap ring, a bellows and a spring seat are not included, so plan on new bolts and nuts rather than reusing the old ones.
Interchange: NS 32390 · NS 37206 · NS 911186
52037954 · 52038257 · 52038258 · 52106742AA · 52106742AB · 52106747AA · 52106747AB · 52121817AA · 52121818AA · 68044344AA · 68157184AA · 77954 · 81933 · G63958 · 32390 · 34514 · 37206 · 911186 · K160048
This part cross-references / interchanges with the following part numbers:
Does the DEA MOUNTS 4713603 fit the 2011-2012 Ram 1500?
Yes. DEA MOUNTS 4713603 is a front shock absorber mount listed for the 2011-2012 Ram 1500 and the 2011-2016 Ram 2500. For other years and models, use the Buyer's Guide tab.
Does this shock absorber mount include a bushing and washer?
Yes, it comes with a bushing and a washer. Bolts, nuts, an insulator, a bearing, a spacer, a sleeve, a snap ring, a bellows and a spring seat are not included.
Is this shock absorber mount greaseable?
No. This mount is not greaseable and does not come pre-greased; its body is steel and rubber.
What are the inside and outside diameters of this shock absorber mount?
The inside diameter is 0.56, the outside diameter is 1.92 and the mount length is 1.92, as listed in the catalog data.
Does 52106742AA cross to the DEA MOUNTS 4713603 shock absorber mount?
Yes, 52106742AA is one of the numbers DEA MOUNTS 4713603 replaces. The full cross-reference list is printed on the Interchange line.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
