Mevotech Supreme Steering Tie Rod End Adjusting Sleeve P/N:MS25657
Dial in your front-end toe setting and firm up loose, wandering steering with the Mevotech Supreme Steering Tie Rod End Adjusting Sleeve MES2841S. It threads between the inner and outer tie rod ends on the front steering linkage, letting a technician adjust and hold front toe during a wheel alignment. This is a direct-fit replacement for the 1991-2000 Chevrolet C3500 and 1991-2002 C3500HD, 1991-2000 GMC C3500 and 1991-2002 C3500HD, plus the 1988-1997 Ford F-53 Motorhome Chassis, 1988-1994 Ford F-59 Commercial Stripped Chassis, and 1990-1997 Ford F-Super Duty — see the Buyer's Guide tab for the full list.
If rusted or seized threads on the original sleeve are contributing to uneven tire wear or an off-center steering wheel, this replaces it so the toe can be set correctly again. Tighten the clamps to specification and have a wheel alignment performed after installation.
Interchange: 612.65802
61265802 · 19290444 · 385906 · BGES2841S · 26035160 · TA5642 · S2841 · S2841PR · ES2841S · IES2841S · 1ES2841S · GES2841S · 29044104 · 27350 · 4251039 · 4251039B · JSA1006 · TES2841S
This part cross-references / interchanges with the following part numbers:
What does the Mevotech Supreme MES2841S adjusting sleeve do?
It threads between the inner and outer tie rod ends on the front steering linkage, allowing a technician to set and hold the front toe during a wheel alignment.
Does this steering tie rod end adjusting sleeve include hardware?
Yes. Mevotech's LaborSaver feature bundles the needed hardware with the sleeve to save time during installation.
What vehicles does the MES2841S fit?
Applications include the 1991-2000 Chevrolet C3500, 1991-2002 Chevrolet C3500HD, 1991-2000 GMC C3500, 1991-2002 GMC C3500HD, and 1988-1997 Ford chassis models. See the Buyer's Guide tab for the full list.
What are signs the adjusting sleeve may need replacing?
Rusted or seized threads, trouble setting toe during an alignment, or a sleeve that won't hold its adjustment can be signs it should be inspected and replaced.
Do I need an alignment after installing it?
Yes. Because the sleeve sets front toe, have a wheel alignment performed after installation and tighten the clamps to the specified torque.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.