Mevotech Supreme MDS1439 front right outer tie rod end for the 2000-2005 Ford Excursion and other vehicles connects the steering linkage to the steering knuckle. The ball end pivots as the wheel steers and the suspension moves.
- Mevotech Supreme line, made for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks
- Engineered in-house with application-specific upgrades for durability and performance
- Labor Saver design with part-specific hardware to make installation faster
- Greaseable design with a 180 degree SAE grease fitting for servicing
- Tested in-house and by third parties for durability and strength
Quick facts
- Part: Mevotech Supreme MDS1439 tie rod end
- Also called: steering tie rod end
- Fits: 2000-2005 Ford Excursion and other vehicles
- Position: Front right outer
- Material: Steel housing, polymer bearing, neoprene dust boot
- Condition: New
A worn tie rod end can show up as loose or wandering steering, uneven front tire wear or a clunk from the front end. Worn ball joints, wheel bearings or other steering linkage can be behind these signs too, so find the cause before buying. Outer tie rod ends are usually changed as a left-and-right pair; this listing is the front right one only, and the left is ordered separately.
Fits
It is a tie rod end for the 2000-2005 Ford Excursion, the 1999-2004 Ford F-250 Super Duty and the 1999-2004 Ford F-350 Super Duty. On this front right side, the 2000-2005 Ford Excursion takes one.
Specifications
Fit and size
- Position: Front right outer
- Quantity per vehicle: 1 (this side)
- Stud type: Threaded
- Adjustable: No
Build and materials
- Housing material: Steel
- Bearing material: Polymer
- Dust boot material: Neoprene
- Greaseable: Yes
- Condition: New
- Country of origin: Thailand
In the box
One tie rod end with its dust boot, castle nut, cotter pin and grease fitting.
Installation notes
- Arrives pre-greased.
- Secure the stud to the vehicle with the part-specific castle nut and cotter pin provided.
Frequently Asked Questions
Does the Mevotech Supreme MDS1439 fit a 2000-2005 Ford Excursion?
Yes. Mevotech Supreme MDS1439 is the front right outer tie rod end for the 2000-2005 Ford Excursion. The left side is a separate part.
Is this Mevotech Supreme steering tie rod end greaseable?
Yes. The MDS1439 comes pre-greased and includes a 180 degree SAE grease fitting for later servicing.
Do I get a castle nut and cotter pin with this tie rod end?
Yes. It comes with the part-specific castle nut and cotter pin, plus the dust boot and a grease fitting.
What are the housing, bearing and dust boot made of?
The housing is steel, the bearing is polymer and the dust boot is neoprene.
How can I tell if a front right outer tie rod end is worn?
Watch for loose or wandering steering, uneven front tire wear or a clunk from the front end. A shop can check the joint for play.
