Mevotech CMS601126 front left upper control arm with ball joint for the 2000-2009 Honda S2000 links the steering knuckle to the chassis and carries the ball joint. This Mevotech control arm replaces the arm and its ball joint as one piece.
- Mevotech Supreme line, engineered in-house with application-specific upgrades for durability
- Protective surface treatment to resist rust
- Durability tested in-house and by third parties
- Steel control arm with rubber bushings included
- Ball joint with a threaded stud
Quick facts
- Part: Mevotech CMS601126 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2000-2009 Honda S2000
- Position: Front left upper
- Material: Steel control arm, rubber bushings
- Condition: New
A clunk over bumps, a loose steering feel or uneven tire wear can mean the arm or its ball joint is worn. These signs alone do not prove this arm is at fault, since a worn tie rod end can produce similar ones.
Fits
This listing is one front left upper arm among the 2000-2009 Honda S2000 control arms, and that side takes one. The right side is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front left upper
- Quantity per application: 1
- Maximum width: 11.0 in
- Maximum length: 10.45 in
- Ball joint stud type: Threaded
Build and materials
- Control arm material: Steel
- Bushing material: Rubber
- Bushings: Included
- Surface: Protective surface treatment
- Condition: New
- Country of origin: Turkey
In the box
One front left upper control arm with ball joint and bushings, plus the part-specific castle nut and cotter pin.
Installation notes
- The ball joint is pre-greased.
- Labor Saver designs, tools and hardware are made to make installation faster and easier.
Interchange: 102-7789 · 522-521
19327312 · CB59057 · CB59057PR · CA10443 · 51460S2A003 · 3CB601121 · RK622523 · GS601126 · 2607622 · 30030197 · X17CA0286
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this the 2000-2009 Honda S2000 upper control arm for the front left side?
Yes. Mevotech CMS601126 is the front left upper control arm for the 2000-2009 Honda S2000. The right side is a separate part.
Does the Mevotech suspension control arm and ball joint assembly come with a castle nut and cotter pin?
Yes. Mevotech CMS601126 includes the part-specific castle nut and cotter pin for the ball joint, along with the bushings.
Does this Mevotech Supreme control arm have a rust-resistant finish?
Yes. The steel arm has a protective surface treatment to resist corrosion, and its bushings are rubber.
How can I tell if a worn upper control arm or ball joint is the problem?
A clunk over bumps, loose steering feel or uneven tire wear can mean wear in this area. A shop can check the ball joint and bushings for play.
Does Mevotech CMS601126 replace the 522-521 control arm?
Yes. 522-521 is on the interchange list for Mevotech CMS601126, so this arm replaces it.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review