Mevotech Supreme CMS70181 front right lower control arm with ball joint for the 2012-2022 Volkswagen Passat and other vehicles links the wheel to the chassis. This Mevotech Supreme control arm, also called a control arm and ball joint assembly, comes with its ball joint and bushings.
A clunk over bumps, loose steering or uneven front tire wear can mean a worn bushing or ball joint, though a strut or tie rod can make similar noises. With the car parked and the engine off, look at the arm for cracks, a split dust boot or torn rubber to find the cause first. If this arm is the cause, this assembly replaces it.
This arm fits the 2012-2022 Volkswagen Passat and the 2012-2019 Volkswagen Beetle. The listing is one arm for the front right, which takes one; the front left is its own part and is ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, bushings and dust boot, plus mounting hardware.
Interchange: 522-838
19340635 · TC3591 · CB43314 · CB43314PR · CA14728 · 2607734 · 30036583 · X52CA4277 · X52CJ4276 · CP5197 · 561407152A · 561407152C
This part cross-references / interchanges with the following part numbers:
Is this a lower arm for the 2012-2022 Volkswagen Passat's front right side?
Yes. Mevotech Supreme CMS70181 is the front right lower control arm with ball joint for the 2012-2022 Volkswagen Passat; the front left side is a separate part.
Is the 2012-2022 VW Passat control arm the same part the 2012-2019 Volkswagen Beetle takes?
Yes. This front right lower control arm with ball joint fits both the 2012-2022 Volkswagen Passat and the 2012-2019 Volkswagen Beetle.
Does this Mevotech Supreme suspension control arm come with the ball joint and nut?
Yes. Mevotech Supreme CMS70181 includes the ball joint, rubber bushings, a rubber dust boot, mounting hardware and a part-specific nylon locking nut.
What is this Mevotech Supreme lower control arm made of?
The arm is stamped steel with a protective surface treatment against rust. The bushings and the dust boot are rubber.
Is the ball joint on this control arm pre-greased?
Yes. The ball joint is pre-greased and has a threaded stud with a bolt-in mounting type. The rubber dust boot is included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
