Monroe 271951 front right strut assembly for the 1993-2002 Toyota Corolla and other vehicles damps spring movement at the front right wheel. It ships as a complete strut and coil spring assembly, with the spring and mount already fitted to the strut.
- Monroe Quick-Strut line: strut, coil spring and upper mount preassembled in one unit
- Application-specific coil spring calibrated to restore ride height and support the vehicle's weight
- Reduces body sway, vibration and road harshness before it reaches the cabin
- Upper strut mount helps keep steering precise and limits noise, vibration and memory steer
- Protective coating resists rust and corrosion, with salt spray testing behind it
Quick facts
- Part: Monroe 271951 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 1993-2002 Toyota Corolla and other vehicles
- Position: Front right
- Condition: New
A worn front strut can show up as a bouncy ride, nose dive under braking or oil on the strut body, but those signs can also come from tires or other suspension parts. Before replacing the strut, look at the visible strut and spring with the car parked and the engine off, checking for oil film, cracks or a broken coil.
Fits
Front struts are normally replaced as a pair; this listing is one strut for the front right, and the front left is a separate part. It is a direct-fit strut replacement for the 1993-2002 Toyota Corolla, the 1998-2002 Chevrolet Prizm and the 1993-1997 Geo Prizm, and the front right position takes one assembly on each. The preassembled mount, spring and strut follow an OE-style design for fit, form and function.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Compressed length: 13.36 in (339.3 mm)
- Extended length: 18.81 in (477.8 mm)
- Travel length: 5.45 in
- Body length: 12.86 in
Build and materials
- Type: strut and coil spring assembly, gas charged
- Suspension: passive; compression and ride height not adjustable
- Condition: New
- Warranty: Monroe limited lifetime warranty
In the box
One front right strut assembly with the coil spring, upper strut mount, coil spring insulator and strut mount insulator.
Installation notes
- Arrives fully assembled, so no spring compressor is needed.
- Mounting hardware is included.
Interchange: LS3484531R · 33TY1116
This part cross-references / interchanges with the following part numbers:
LS3484531R, 33TY1116, 271951
Frequently Asked Questions
Is the Monroe strut assembly 271951 right for the 1993-2002 Toyota Corolla?
Yes. Monroe 271951 is the front right strut assembly for the 1993-2002 Toyota Corolla; the front left side needs its own part.
What comes with this Monroe quick strut assembly besides the strut?
The coil spring, upper strut mount, and coil spring and strut mount insulators are included, along with mounting hardware. Monroe 271951 ships fully assembled.
How far does this Monroe complete strut assembly extend and compress?
It measures 13.36 in (339.3 mm) compressed and 18.81 in (477.8 mm) extended, with 5.45 in of travel.
What signs can mean a front right strut is worn out?
A bouncy ride, nose dive when braking or oil on the strut body can point to wear. A shop can test the suspension to find the cause.
Do I need a spring compressor to install the Monroe 271951?
No. The spring and upper mount come preassembled on the strut, so no spring compressor is needed.
