Monroe Shocks & Struts 906987 front strut mount for the 2006-2012 Toyota RAV4 and other vehicles joins the top of the strut to the vehicle body.
- Strut-Mate mounting kit line, made to complement the ride control characteristics of Monroe struts
- Advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer
- Fit checked and ride tested
- Mounting hardware with nuts and a spacer included
- Constructed with durable materials that help resist wear
Quick facts
- Part: Monroe Shocks & Struts 906987 strut mount
- Also called: suspension strut mount
- Fits: the 2006-2012 Toyota RAV4 and other vehicles
- Position: Front
A worn suspension strut mount can show up as a clunk or creak over bumps or when turning. Worn struts, coil springs or tie rods can be behind those signs too, so find the cause before buying. This listing is one mount, and these vehicles take two, one on each side of the front axle, so both front sides are normally replaced together.
Fits
The 2006-2012 Toyota RAV4, 2010-2015 Toyota Prius and 2011-2016 Scion tC all take this strut mount, which is a direct fit for replacing the OE strut mount, and so do other vehicles.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Product line: Strut-Mate
- Mounting hardware: included, with nuts and a spacer
- Country of origin: Taiwan
In the box
One strut mount with mounting hardware, including nuts and a spacer. Bolts, washers, a bushing, a sleeve, a dust boot, a bumper, an insulator and a coil spring seat are not included; plan on new bolts and washers, since the old ones may not be reusable.
Installation notes
- Install it when replacing conventional struts or springs.
Interchange: 706987
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is Monroe Shocks & Struts 906987 the right tC mount for the 2011-2016 Scion tC?
Yes. Monroe Shocks & Struts 906987 is a front strut mount for the 2011-2016 Scion tC. Driving something else? Look up your own make and model in the "Vehicles it fits" section.
Are bolts included with the Monroe Shocks & Struts 906987 strut mount?
No. Monroe Shocks & Struts 906987 comes with nuts and a spacer, but bolts, washers, a bushing, a sleeve and a dust boot are not included.
What does the elastomer in this Strut-Mate mount do?
Enhanced metal-to-rubber bonding is how this mount is designed to hold down noise, vibration and memory steer.
How can I tell a front strut mount is wearing out?
A worn front strut mount can show up as noise or vibration from the front end, or as memory steer. If you are unsure, a shop can inspect the front suspension.
Does 706987 interchange with this strut mount?
Yes. 706987 is listed as an interchange number for Monroe Shocks & Struts 906987.
