Monroe Shocks & Struts Suspension Strut P/N:72292
Monroe Shocks & Struts 72211 front right suspension strut for the 2004-2007 Toyota Highlander and other vehicles damps spring and wheel movement at the front right corner. It is designed to restore the original factory drivability and performance of the vehicle.
A worn strut can show up as oil on the strut body, a bouncy ride or a clunk over bumps. Before you replace this one, rule out the tires, sway bar links and other front suspension parts, since they can cause similar noise or pulling. Replacing the front struts as a pair is the usual practice, and this listing is one strut for the front right; the front left is ordered separately.
This strut is listed for a wide range of Toyota and Lexus models, including the 2004-2007 Toyota Highlander, the 2007-2009 Lexus RX350 and the 2006-2008 Lexus RX400h. If your vehicle is not named here, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
One front right strut with mounting hardware. Strut mounts, the coil spring and a dust shield are not included; the dust boot and jounce bumper are optional and sold separately. This listing holds one strut, and the front right takes one.
Interchange: ST5527091R · 2331660R · 331660R · 3331660R · G56731 · 235904 · 334399 · 339208 · 4851049445 · 4851049805 · 48510A9360 · ST56731 · 7872211 · 214012
This part cross-references / interchanges with the following part numbers:
Is this one of the struts for the 2004-2007 Toyota Highlander, front right side?
Yes. Monroe Shocks & Struts 72211 is the front right strut for the 2004-2007 Toyota Highlander. For other Toyota and Lexus models, look up your vehicle in the "Vehicles it fits" section.
Is this one of the 2004-2007 Toyota Highlander shocks and struts that also fits the 2007-2009 Lexus RX350?
Yes. Monroe 72211 is listed for both the 2004-2007 Toyota Highlander and the 2007-2009 Lexus RX350. It is the front right strut only; the front left is a separate part.
Does the Monroe 72211 front right strut come with mounting hardware?
Yes, mounting hardware is included. Strut mounts, the coil spring and a dust shield are not, and the dust boot and jounce bumper are sold separately.
How long is the Monroe 72211 strut compressed and extended?
Compressed length is 16.52 in (419.7 mm) and extended length is 21.17 in (537.8 mm), with 4.65 in of travel.
How can I tell if a front strut like this one is worn?
Leaking oil on the strut body, uneven tire wear or the front end diving under braking can mean a strut is worn. Other front-end parts can cause similar signs, and a shop can test it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.