Monroe Shocks & Struts 72489 rear right suspension strut for the 2008-2013 Toyota Highlander and other vehicles damps spring and wheel movement at the rear right wheel. The OESpectrum line is intended to restore a vehicle's original factory drivability and performance, with handling precision and control.
- Monroe OESpectrum line strut with Twin Technology Active Control System to isolate impact-related noise, vibration and harshness
- Rod displaced valving, tuned to each vehicle, adjusts to road extremes for consistency and a smooth ride on most applications
- All-weather fluid with special additives for extreme temperatures that help reduce oil breakdown
- PTFE-banded piston seals consistently between the piston and the pressure tube
- Nitrogen gas charge reduces aeration to help keep the tire in contact with the road on most applications
- Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal, where applicable
Quick facts
- Part: Monroe Shocks & Struts 72489 suspension strut
- Fits: 2008-2013 Toyota Highlander and other vehicles
- Position: Rear right
- Condition: New
A bouncy ride, a clunk over bumps or body sway can mean a rear strut is worn. A strut mount or another suspension part can make similar noises, so with the engine off, look for oil running down the strut body or a bent rod before replacing it. This listing is one strut; the rear left is a separate part, and the two sides are normally replaced together.
Fits
It fits the 2008-2013 Toyota Highlander and the 2009-2015 Toyota Venza. The rear axle takes one strut on each side.
Specifications
Fit and size
- Position: rear right
- Quantity: 1 per listing
- Compressed length: 17.421 in (442.5 mm)
- Extended length: 24.547 in (623.5 mm)
- Travel length: 7.126 in
- Body length: 12.358 in
- Body diameter: 2 in (50.8 mm)
- Upper mount code: 181
Build and materials
- Type: gas-charged strut, rod extends automatically
- Suspension: passive, with no adjustable compression, rebound or ride height
- Internal rebound bumper: yes
- Condition: new
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: China
In the box
One rear right strut with mounting hardware and a dust shield. The strut mount and coil spring are not included.
Interchange: 2701423337 · 333320R · 333433R · G52381 · 339234 · 339236 · 500087 · NS72489 · S339234 · PM6000448 · 470425 · 316628 · 42142245 · JGM4587SR · 7872489 · 4853049875 · 4853080430 · 4853080431 · 48530A9730 · 48530A9745 · 48530A9750
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2701423337, 333320R, 333433R, G52381, 339234, 339236, 500087, 72489, NS72489, S339234, PM6000448, 470425, 316628, 42142245, JGM4587SR, 7872489, 4853049875, 4853080430, 4853080431, 48530A9730, 48530A9745, 48530A9750
Frequently Asked Questions
Are these struts for the 2008-2013 Toyota Highlander a rear right fit?
Yes. Monroe Shocks & Struts 72489 is the rear right strut for the 2008-2013 Toyota Highlander and the 2009-2015 Toyota Venza; the rear left side is a separate part.
Does the Monroe 72489 strut come with mounting hardware?
Yes. Monroe Shocks & Struts 72489 includes mounting hardware and a dust shield. The strut mount and coil spring are not included.
How long is the Monroe OESpectrum rear right strut compressed and extended?
This strut measures 17.421 in (442.5 mm) compressed and 24.547 in (623.5 mm) extended, with 7.126 in of travel.
Does this strut replace number 4853049875?
Yes. 4853049875 is one of the numbers this strut replaces, along with 48530A9730 and 333320R.
Is the Monroe 72489 strut gas charged?
Yes. The rod extends on its own, and it is a passive strut with no adjustable compression, rebound or ride height.
