Help keep your truck's steering tight and responsive with the MOOG CHASSIS tie rod end ES800375, a steering drag link end that connects at the pitman arm and uses MOOG's greaseable design. It fits many trucks, among them the 2011-2013 Ram 2500, 2003-2010 Dodge Ram 2500 and 2011-2013 Ram 3500, as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for every fitment.
This Steering Drag Link / Tie Rod End is cataloged by MOOG as a tie rod end and described as an At Pitman Arm Steering Drag Link, so you will find it listed under both names.
- Pressed-in cover plate: The patented plate seals out debris and minimizes looseness, helping reduce bearing wear and promote longer life.
- Greaseable socket: Lets new lubricant flush out contaminants to reduce corrosion and wear.
- Belleville preload washer: Helps absorb impact and keep the bearing package tight as the bearings wear.
- Heat-treated ball studs: Treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
Inside, the Problem Solver® Gusher bearing uses a metal-to-metal design for strength and lets grease flow through the bearing surface for reduced friction. Precision tolerances are intended to make installation and steering alignment easier, and MOOG engineers test the design throughout development. Signs this part may need replacing include excess play in the steering wheel, wandering, clunking when turning and uneven tire wear.
Interchange: 310-291422 · 626.63805 · 534-878 · 401-2367
310291422 · 62663805 · 534878 · 4012367 · 68036940AA · 68036940AC · 68036940AD · TA5046 · TI81031XL · GES800375 · TI81031 · ES800779 · MS25709 · 2693704 · JTE1371 · VES800375
This part cross-references / interchanges with the following part numbers:
310-291422, 626.63805, 68036940AA, 68036940AC, 68036940AD, TA5046, 534-878, TI81031XL, ES800375, GES800375, TI81031, ES800779, MS25709, 2693704, 401-2367, JTE1371, VES800375
Frequently Asked Questions
Is this the right Ram 2500 tie rod for a 2011-2013 Ram 2500?
It is a direct-fit replacement at the pitman arm for the 2011-2013 Ram 2500 and the 2003-2010 Dodge Ram 2500. Check the "Vehicles it fits" section to confirm your exact truck.
Will it work as a Ram 3500 tie rod end on a 2011-2013 Ram 3500?
Yes. The listed applications include the 2011-2013 Ram 3500, where it installs at the pitman arm. The "Vehicles it fits" section shows the complete fitment.
What does this steering tie rod end do?
It forms the pivoting joint where the drag link connects to the pitman arm. It passes steering motion from the steering gear into the linkage while letting the joint move freely.
Can I grease this MOOG drag link end?
Yes. It has a greaseable socket, so new lubricant can be added to flush out contaminants and help reduce corrosion and wear.
What are signs it may need replacing?
Common signs include excess play in the steering wheel, wandering, clunking when turning and uneven tire wear. Diagnose the cause first, and have the alignment checked after installing new steering parts.
