MOOG Chassis Products ES800387 front right outer tie rod end for the 2007-2011 Mercedes-Benz CLS550 and other vehicles links the steering linkage to the front wheel. Also called a steering tie rod end, it is the pivot joint at the outer end of that linkage.
- QuickSteer line, designed and tested to restore steering and handling to their original performance
- Precision tolerances for easy installation and steering alignment
- Coated for corrosion resistance
- Boot keeps out contaminants
- Forged alloy steel construction for durability
Quick facts
- Part: MOOG Chassis Products ES800387 tie rod end
- Also called: steering tie rod end
- Fits: 2007-2011 Mercedes-Benz CLS550 and other vehicles
- Position: Front right outer
- Material: Forged alloy steel
- Condition: New
A worn tie rod end can show up as loose or wandering steering, a clunk over bumps, uneven front tire wear or a torn boot. Worn ball joints, control arm bushings or wheel bearings can be behind similar signs too, so find the cause before you buy a replacement.
Fits
Designed for OE fit and function, this tie rod end is listed for a wide range of Mercedes-Benz models, led by the 2007-2011 Mercedes-Benz CLS550, the 2007-2011 Mercedes-Benz CLS63 AMG and the 2003-2009 Mercedes-Benz E320. If your Mercedes-Benz is not named here, look it up in the "Vehicles it fits" section. This listing is one part for the front right outer position, which takes one; the front left outer is a separate part ordered on its own, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right outer
- Quantity per vehicle: 1
- Thread diameter: 14.0 mm at both ends
- Thread pitch: 1.5 mm at both ends
- End 1: female
Build and materials
- Type: Straight
- Material: Forged alloy steel
- Coating: Corrosion-resistant
- Condition: New
Frequently Asked Questions
Is the MOOG ES800387 tie rod end right for the 2007-2011 Mercedes-Benz CLS550?
Yes. MOOG Chassis Products ES800387 is the front right outer tie rod end for the 2007-2011 Mercedes-Benz CLS550. For another car, look it up in the "Vehicles it fits" section.
What thread size does the MOOG ES800387 tie rod end have?
MOOG ES800387 has a 14.0 mm thread diameter and a 1.5 mm thread pitch at both ends, and end 1 is female.
Is this tie rod end forged steel with a corrosion coating?
Yes. This front right outer tie rod end is made of forged alloy steel and is coated for corrosion resistance, and its boot keeps out contaminants.
How can I tell a front tie rod end is wearing out?
Loose or wandering steering, a clunk over bumps, uneven front tire wear or a torn boot can point to a worn tie rod end. A shop can check it for play.
Is this a left or right tie rod end?
It is the front right outer position. This listing is one part, and the front left outer tie rod end is a separate part that is ordered on its own.
