MOOG Chassis RK620285 front right upper control arm with ball joint for the 1998-2002 Honda Accord and other vehicles links the front right wheel to the body and pivots on a ball joint. Sold as a control arm and ball joint assembly, it replaces the arm and joint in one piece.
- Induction-hardened studs and a patent-pending carbon fiber-reinforced bearing reduce socket friction for longer socket life
- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- Pre-installed ball joint with a sealed socket for maintenance-free operation
- Heat-treated arm for structural strength to inhibit premature failure
- Coated studs and an e-coated steel arm inhibit premature deterioration
- Laser-etched ID marks genuine MOOG parts
Quick facts
- Part: MOOG Chassis RK620285 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1998-2002 Honda Accord and other vehicles
- Position: front right upper
- Material: stamped steel
- Condition: New
A clunk over bumps, uneven front tire wear or wandering steering can point to a worn arm, bushing or ball joint. Worn tie rod ends, struts or other suspension bushings can be behind these signs too, so find the cause before buying.
Fits
It is a direct-fit replacement for the 1998-2002 Honda Accord, the 2001-2003 Acura CL and the 1999-2003 Acura TL. This listing is one arm for the front right upper position; the front left upper is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front right upper
- Quantity for this position: 1
- Control arm maximum length: 10.510 in
- Ball joint mounting type: press in
- Ball joint stud type: threaded
Build and materials
- Control arm material: stamped steel
- Bushing material: rubber
- Pre-greased: yes
- Adjustable: no
- Condition: New
- Country of origin: Taiwan
In the box
One control arm with ball joint, with its bushings, a grease fitting and the mounting hardware.
Installation notes
- Comes pre-greased and ready to install.
- Precision tolerances are made for easy installation and steering alignment.
Frequently Asked Questions
Is this the right control arm for the 1999-2003 Acura TL?
Yes. MOOG Chassis RK620285 fits the 1999-2003 Acura TL, and the front right upper position takes one arm.
Which side does this 1998-2002 Honda Accord upper control arm go on?
It goes on the front right, upper position. The front left upper arm is a separate part.
Does the RK620285 arm come with a grease fitting and bushings?
Yes. It includes the bushings, a grease fitting and mounting hardware, and the ball joint is already installed and pre-greased.
Is the ball joint on this MOOG control arm already installed?
Yes. The ball joint is pre-installed in the arm; it is a press-in type with a threaded stud, so no separate joint is needed.
What signs can a worn front upper control arm show?
A clunk over bumps, uneven front tire wear or vague steering can mean a worn arm, bushing or ball joint. A shop can check the arm for play.
