MOOG Chassis Products RK622196 front right upper control arm with ball joint for the 2014-2017 Infiniti QX70 and other vehicles connects the front right wheel to the suspension and lets it move with the road. The arm is made for the front right upper position, and its ball joint is pre-installed.
- Precision tolerances for easy installation and steering alignment
- Rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Ball joint with a sealed socket for maintenance-free operation
- Ball stud shape that supports fatigue life
- Heat treated to inhibit premature failure
- E-coated control arm and coated studs to inhibit premature deterioration
Quick facts
- Part: MOOG Chassis Products RK622196 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2014-2017 Infiniti QX70 and other vehicles
- Position: Front right upper
- Condition: New
A clunk over bumps, loose or wandering steering or uneven front tire wear can mean this arm or its ball joint is worn, though a worn tie rod end or wheel bearing can be behind the same signs. Both front upper arms are normally replaced together; this listing is one arm, for the right side.
Fits
The 2014-2017 Infiniti QX70, the 2013 Infiniti FX37 and the 2009-2013 Infiniti FX50 are among the cars this arm fits, with one needed at the front right upper position of each. The front left is a separate part.
Specifications
Fit and size
- Position: Front right upper
- Quantity per vehicle: 1
- Control arm maximum length: 12.4 in
- Ball joint mounting type: Press in
- Ball joint stud type: Pinch
- Adjustable: No
Build and materials
- Bushing material: Rubber
- Bushings and ball joint: Included
- Pre-greased: Yes
- Grease fitting: Not included
- Condition: New
- Country of origin: Turkey
In the box
One control arm with its ball joint, rubber bushings and mounting hardware. A grease fitting is not included.
Interchange: 102-7687 · 522-854
19464656 · 45D10501 · TC7386 · TC7387 · CB61058PR · CA8808 · 545241CA0A · 4CB30328 · CB61058 · CMS801128 · MS301115 · MS801128 · 2607079 · 5021453
This part cross-references / interchanges with the following part numbers:
19464656, 45D10501, 102-7687, TC7386, TC7387, 522-854, CB61058PR, CA8808, 545241CA0A, 4CB30328, CB61058, CMS801128, MS301115, MS801128, 2607079, 5021453
Frequently Asked Questions
Does the MOOG Chassis Products RK622196 fit the 2014-2017 Infiniti QX70?
Yes. MOOG Chassis Products RK622196 is the front right upper control arm with ball joint for the 2014-2017 Infiniti QX70. If your car is not named here, find it in the "Vehicles it fits" section on this page.
What comes with this front right upper control arm?
The arm comes with its ball joint, rubber bushings and mounting hardware already included. A grease fitting is not included.
Is this control arm and ball joint assembly pre-greased?
Yes. The MOOG Chassis Products RK622196 comes pre-greased, and its ball joint has a sealed socket for maintenance-free operation.
What are the signs of a worn front upper control arm bushing or ball joint?
Cracked or split bushings, play in the ball joint or a clunk over bumps can mean wear. A shop can check ball joint play safely.
What kind of ball joint does the RK622196 use?
The ball joint is a press-in type with a pinch stud, and the bushings are rubber. This listing is the front right upper arm only.
