MOOG Chassis Products RK623804 front left lower control arm for the 2019-2020 Hyundai Santa Fe links the front left wheel to the chassis and lets it move with the road. Also called a suspension control arm, it is a 2019-2020 Hyundai Santa Fe control arm engineered for structural strength and corrosion protection.
- Induction-hardened studs with a patent-pending carbon fiber-reinforced bearing that reduces socket friction for longer socket life
- Greaseable socket that lets new lubricant flush out contaminants
- Pre-installed dust boot seal that blocks wear-causing contaminants
- Specially engineered coatings on metal surfaces to inhibit deterioration from rain, snow, salt and road grime
- Pre-installed bushings with optimized stiffness to inhibit noise
- Laser-etched ID that marks genuine MOOG quality
Quick facts
- Part: MOOG Chassis Products RK623804 control arm
- Also called: suspension control arm
- Fits: 2019-2020 Hyundai Santa Fe
- Position: Front left lower
- Condition: New
A clunk over bumps, loose steering or uneven tire wear can mean this arm is worn, though a worn tie rod end or sway bar link can be behind the same signs, so find the cause before replacing anything.
Fits
It fits the 2019-2020 Hyundai Santa Fe, which takes one arm on each side of the front axle. This listing is one arm for the front left; the front right is a separate part, and the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: front left lower
- Quantity per application: 1
Build and materials
- Bushings and dust boot: pre-installed
- Condition: new
- Country of origin: China
In the box
One control arm and the hardware needed to install it.
Installation notes
- Precision tolerances are intended to make installation and steering alignment easier.
Interchange: 526-679
54500S1050 · 5CB90480
This part cross-references / interchanges with the following part numbers:
526-679, 54500S1050, 5CB90480
Frequently Asked Questions
Is this lower control arm right for the 2019-2020 Hyundai Santa Fe?
Yes. MOOG Chassis Products RK623804 is the front left lower control arm for the 2019-2020 Hyundai Santa Fe. The front right side takes its own separate arm.
Does the MOOG RK623804 come with hardware and bushings?
Yes. This control arm comes with the hardware needed to install it, and the bushings and dust boot seal are already installed on the arm.
Can the socket on this control arm be greased?
Yes. The socket is greaseable, so new lubricant can push contaminants out. This helps reduce corrosion and wear in the socket.
How can I tell if a front lower control arm is worn?
Listen for clunks over bumps, and watch for steering that wanders or a vehicle that pulls to one side. A shop can inspect the bushings and socket play.
Is 526-679 an interchange number for this MOOG control arm?
Yes. 526-679 is listed for MOOG Chassis Products RK623804, along with 54500S1050 and 5CB90480 on the Interchange line.
