MOOG LK074 front right suspension knuckle assembly for the 2003-2007 Honda Accord carries the wheel and lets it spin on its bearing. It is also called a wheel bearing and hub assembly, and it replaces the knuckle, hub and bearing on that corner in one piece.
- Part of the MOOG Hub Assemblies product line
- Knuckle and backing plate are e-coated for corrosion resistance
- Materials engineered to provide long life and dependability
- Tested throughout design and development by MOOG engineers
Quick facts
- Part: MOOG LK074 suspension knuckle assembly
- Also called: wheel bearing and hub assembly
- Fits: 2003-2007 Honda Accord
- Position: Front right
A humming or growling noise that rises with road speed, play in the wheel or a vibration through the steering wheel can mean the bearing on this corner is worn. Before you replace it, look over the front right tire for cupping or uneven wear, since a worn tire can hum much like a bearing.
Fits
It is a direct-fit replacement for the front right corner of the 2003-2007 Honda Accord, which takes one on this side; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 (front right)
Build and materials
- Construction: pre-assembled, bolt-on unit
- Finish: e-coated knuckle and backing plate
- Country of origin: China
In the box
One MOOG knuckle, one MOOG wheel hub with studs, the bearing, an axle nut and a backing plate.
Installation notes
- Comes pre-assembled and bolts on as one unit.
- Designed to make bearing replacement easier without special tools or a press.
Interchange: 698-400
44348SDAA00
Frequently Asked Questions
Will MOOG LK074 replace the front right wheel bearing on a 2003-2007 Honda Accord?
Yes. MOOG LK074 is a direct-fit replacement for the front right corner of the 2003-2007 Honda Accord, with the knuckle, hub and bearing in one pre-assembled unit; the front left side is a separate part.
Does this suspension knuckle assembly come with the axle nut and wheel studs?
Yes. This suspension knuckle assembly comes with the knuckle, a wheel hub with studs, the bearing, an axle nut and a backing plate, pre-assembled as one unit.
Is the knuckle on this suspension knuckle assembly coated against rust?
Yes. The knuckle and the backing plate on this suspension knuckle assembly are e-coated for corrosion resistance.
What noises can a worn front right wheel bearing make?
A hum or grinding that grows louder with speed can mean the bearing in this suspension knuckle assembly is worn; a shaking steering wheel or a loose-feeling wheel can mean the same.
Do I need a bearing press to install MOOG LK074?
No. MOOG LK074 arrives pre-assembled as a bolt-on unit, built to remove the need for a press or special tools during bearing replacement.
