MOOG 512246 wheel bearing and hub assembly for the 2005-2011 Cadillac STS and other vehicles holds the wheel on the vehicle and lets it rotate. The bearing, hub and flange come as one unit.
- Roll-form design sets a consistent factory-installed preload to minimize noise and wear
- Application-specific raceway design reduces stress, rotation and heat on the components
- Quad lip seal design keeps moisture and other contaminants out to inhibit damage
- Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG 512246 wheel bearing and hub assembly
- Fits: the 2005-2011 Cadillac STS and other vehicles
- Position: Front, rear
- Condition: New
A worn wheel bearing and hub assembly can show up as a hum or growl that changes with speed, a vibration, or play at the wheel. Before you replace the wheel bearing and hub assembly, rule out worn tires, a loose wheel or a brake problem, since those can cause similar noise or vibration. This listing is one piece, and the two on an axle are normally replaced together.
Fits
The vehicles it fits include the 2005-2011 Cadillac STS, the 2003-2007 Cadillac CTS and the 2005-2007 Saturn Relay. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front, rear
- Quantity per vehicle: 2
- Bolt circle diameter: 116 mm, 3 flange bolt holes
- Flange diameter: 145.5 mm
- Brake pilot diameter: 70.6 mm
- Flange offset: 42 mm
Build and materials
- ABS sensor: included
- Wheel studs: coated
- Condition: New
- Country of origin: China
In the box
One wheel bearing and hub assembly with the anti-lock brake sensor. The vehicles take two.
Interchange: 91-45835
WE61335 · 12413071 · 12413121 · 12413122 · 12413228 · 7467580 · 88964105 · H512246 · BR930298 · 513186 · HA590091
This part cross-references / interchanges with the following part numbers:
WE61335, 91-45835, 12413071, 12413121, 12413122, 12413228, 7467580, 88964105, H512246, BR930298, 513186, HA590091
Frequently Asked Questions
Does MOOG 512246 work as a 2003-2007 Cadillac CTS wheel bearing?
Yes. MOOG 512246 fits the 2003-2007 Cadillac CTS, and the vehicle takes two. For another model, open the "Vehicles it fits" section to check your exact model and engine.
Does this MOOG wheel bearing and hub assembly come with the ABS sensor?
Yes. The anti-lock brake sensor is included with MOOG 512246. This listing is one wheel bearing and hub assembly, and the vehicle takes two.
What is the bolt circle on the MOOG 512246 wheel bearing and hub assembly?
The bolt circle diameter is 116 mm with 3 flange bolt holes. The flange diameter is 145.5 mm, the brake pilot diameter is 70.6 mm and the flange offset is 42 mm.
My car hums at speed. Could the wheel bearing and hub assembly be worn?
It can be. A hum or growl that changes with speed, or a loose feel at the wheel, can mean a worn wheel bearing. A shop can check it and tell you what is needed.
What does the quad lip seal on this wheel bearing and hub assembly do?
The quad lip seal design keeps moisture and other contaminants out, which inhibits damage. The wheel studs are coated to resist corrosion and rust.
