MR. GASKET 1076 rocker arm stud for the 1988-1995 Chevrolet C1500 V8 5.0L or 5.7L and other vehicles screws into the cylinder head and anchors the rocker arm. OE style press-in rocker studs can pull out of the head with high lift camshafts, so this set screws in instead.
- Heat-treated Grade 8 steel with a black oxide coating
- Ultra Seal screw-in design, without an oil hole
- 7/16-14 bottom thread for a 7/16 in. threaded hole in the head
- Sixteen studs per kit, each with a 3/8-24 x 1.47 inch long top
- Made for high performance street applications
Quick facts
- Part: MR. GASKET 1076 rocker arm stud
- Also called: engine rocker arm stud
- Fits: 1988-1995 Chevrolet C1500 V8 5.0L or 5.7L and other vehicles
- Material: Steel
- Condition: New
A worn or damaged engine rocker arm stud can show up as stripped threads, a stud pulled loose from the head, or a loose rocker arm with valvetrain noise. Before you replace the studs, rule out a worn rocker arm or valve lash that is out of adjustment, since those can sound similar.
Fits
Fitment includes the 1988-1995 Chevrolet K1500 V8 5.0L or 5.7L, the 1995 Chevrolet Tahoe V8 5.7L and a wide range of other Chevrolet, GMC, Buick, Oldsmobile and Pontiac models. Open the "Vehicles it fits" section to check your exact model and engine. A 1988-1995 Chevrolet C1500 V8 5.0L or 5.7L takes one kit of sixteen studs.
Specifications
Fit and size
- Engine: Chevy Small Block (262-400)
- Quantity per vehicle: 1 kit
- Studs in kit: 16
- Top thread: 3/8-24
- Bottom thread: 7/16-14
- Effective stud length: 1.470 in
- Head hole: 7/16 in. threaded; use a 7/16 in. - 14 tap
Build and materials
- Type: screw-in, without an oil hole
- Material: steel, Grade 8, heat-treated
- Finish: black oxide
- Condition: new
- Warranty: Mr. Gasket manufacturer's limited 1 year warranty
- Country of origin: United States
In the box
One kit of sixteen rocker arm studs.
Installation notes
- Use a 7/16 in. - 14 tap for the threaded hole in the head.
- Easy to install.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will MR. GASKET 1076 fit the 1988-1995 Chevrolet C1500 V8 5.0L or 5.7L?
Yes. MR. GASKET 1076 fits the 1988-1995 Chevrolet C1500 V8 5.0L or 5.7L. For other models and engines, open the "Vehicles it fits" section and check yours.
How many studs come in the MR. GASKET 1076 kit?
The MR. GASKET 1076 kit contains 16 studs. Each stud is 3/8-24 x 1.47 inch long top x 7/16-14 bottom.
What tap do I need for the head holes with these screw-in rocker arm studs?
Use a 7/16 in. - 14 tap for the 7/16 in. threaded hole in the head. These studs are made without an oil hole.
Are these rocker arm studs Grade 8 steel with a black oxide coating?
Yes. MR. GASKET 1076 is made of heat-treated Grade 8 steel with a black oxide coating.
What warranty comes with the MR. GASKET 1076 rocker arm studs?
Mr. Gasket backs this stud set with a manufacturer's limited 1 year warranty.
