Ignition Coil for 2004-2006 Toyota Camry & More - NGK 48930
NGK 48930 ignition coil for the 2004-2006 Toyota Camry V6 3.3L and other vehicles turns battery voltage into the high-voltage spark that fires a spark plug.
- Vacuum-sealed epoxy resin and thermoplastic coil housing for dielectric strength and voltage insulation
- Precision coil windings and laminations, plus a custom NGK ASIC chipset that tunes efficiency and helps protect the components
- Flow and stress modeling used to find and avoid common failure points, and testing during manufacturing
- Pencil-type coil-on-plug design
Quick facts
- Part: NGK 48930 ignition coil
- Fits: 2004-2006 Toyota Camry V6 3.3L and other vehicles
- Condition: New
Before you replace a coil for a misfire, rough idle or a lit check engine light, rule out the spark plug and the connector at that cylinder first, since either one can produce those signs too.
Fits
The NGK ignition coil is a direct-fit replacement for the 2004-2006 Toyota Camry V6 3.3L, the 2004-2010 Toyota Highlander V6 3.3L, the 2004-2006 Toyota Sienna V6 3.3L and many other vehicles. The 2004-2006 Toyota Camry V6 3.3L takes six, and this listing is one coil from NGK. For any other car, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 6
- Connector quantity: 1
Build and materials
- Ignition system: distributorless
- Condition: New
- NGK part number: U5146
- Warranty: NGK 3 year/36,000 mile warranty
In the box
One ignition coil with its ignition control module and high-temperature coil boot, plus jumper harnesses where the application requires them.
Interchange: 2505-307322 · 178-8347 · 178-8408 · UF-430 · UF-506 · 36-8095 · 90080-19025 · 90919-02246
8415207 · E1006 · E910 · GN10316 · IC550 · IC586 · U5146
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this ignition coil right for a 2004-2006 Toyota Camry V6 3.3L?
Yes, NGK 48930 fits the 2004-2006 Toyota Camry V6 3.3L, which takes six coils; this listing is a single coil.
Will this work as an ignition coil for the 2004-2010 Toyota Highlander V6 3.3L?
Yes, the 2004-2010 Toyota Highlander V6 3.3L is a fit for NGK 48930 and takes six coils; each listing is one coil.
Does the NGK coil pack include the boot and control module?
Yes. This NGK 48930 coil comes with its ignition control module and a high-temperature coil boot, plus jumper harnesses where the application requires them.
Is this a pencil-type coil for a distributorless ignition system?
Yes. This coil is a pencil-type coil-on-plug unit for a distributorless ignition, with one connector.
How is this NGK coil tested?
The coil must pass extreme testing during manufacturing. Its design also uses flow and stress modeling to find and avoid common failure points.
Published by the manufacturer of this part. Links open in a new tab.
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Installation instructions PDF
- Technical bulletin PDF
- Brand image 1 Diagram
- Brand image 2 Diagram
- Brand image 3 Diagram
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review