NSK Wheel Bearing and Hub Assembly P/N:68BWKH02
NSK 62BWKH01A1 front wheel bearing and hub assembly for the 2002-2006 Mini Cooper holds the front wheel on the axle and lets it turn. It is a driven unit that replaces the bearing and hub as one piece.
A humming or growling noise that rises with speed, play at the wheel or an ABS warning light can mean a worn bearing. These signs alone do not prove the bearing is at fault, since a worn tire can hum in a similar way. This listing is one assembly, and the car takes two, one on each side of the front axle. Both sides are normally replaced together.
It is a front wheel bearing that fits the 2002-2006 Mini Cooper.
Fit and size
Build and materials
Interchange: 31226756889
This part cross-references / interchanges with the following part numbers:
Is this NSK wheel hub assembly for the front or the rear of the car?
This hub assembly is a front unit. It is a driven hub with an integrated magnetic encoder for the ABS.
Is this a wheel bearing replacement for the 2002-2006 Mini Cooper?
Yes. NSK 62BWKH01A1 replaces the front bearing and hub as one piece on the 2002-2006 Mini Cooper.
Does this wheel bearing have a built-in ABS encoder?
Yes. NSK 62BWKH01A1 has an integrated magnetic encoder seal for the ABS signal, and the unit is listed as ABS equipped.
What are the wheel stud and pilot sizes on this front hub?
This front hub has four M12X1.5 wheel studs on a 100 mm bolt circle, with a 56 mm wheel pilot, a 64 mm brake pilot and an 81 mm hub pilot.
Does this hub bearing need to be greased?
No. The bearing is sealed for life with all-weather grease, so it needs no maintenance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.