NTK for 1994-1995 Dodge Ram 1500 & More - NGK O2 SENSORS 23023
NGK O2 SENSORS 23023 ntk for the 1994-1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L and other vehicles reads the oxygen content of the exhaust for the engine computer. Its constant closed-loop feedback to the ECU helps control the air-fuel ratio.
- Vibration and thermal shock testing during development, plus testing during manufacturing
- Water-resistant connectors and harness accessory hardware for easy installation
- 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects the ceramic element against poisoning
- Dual-coated platinum interface and a thinner ceramic element for quick light-off and response times
Quick facts
- Part: NGK O2 SENSORS 23023 ntk
- Fits: 1994-1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L and other vehicles
- Condition: New
Poor fuel economy, a rough idle or a check engine light can mean the oxygen sensor is worn, but a fuel delivery fault or a weak catalytic converter can sit behind them too, so trace the cause before you replace it.
Fits
The vehicles it fits also include the 1994-1995 Dodge Ram 2500 V8 5.2L, 5.9L or V10 8.0L and many more. This listing is one sensor, and the 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L takes one.
Specifications
Fit and size
- Hex size: 7/8" (22mm)
- Quantity per vehicle: 1
Build and materials
- Technology: switching zirconia type
- Heated: yes
- Condition: new
Frequently Asked Questions
Is this NTK O2 sensor right for a 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L?
Yes. NGK O2 SENSORS 23023 ntk fits the 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L, one sensor per vehicle. Find your own car's year and engine in the "Vehicles it fits" section.
What wrench size does the NGK 23023 oxygen sensor need?
The hex size is 7/8" (22mm). That is the size of the oxygen sensor's hex on NGK O2 SENSORS 23023 ntk.
Is this oxygen sensor heated, and what technology does it use?
Yes. This oxygen sensor is heated and uses switching zirconia technology.
Does this NTK oxygen sensor come with a connector and harness hardware?
Yes. It is equipped with water-resistant connectors and harness accessory hardware, which are there to make installation easier.
What protects the ceramic element in this NTK oxygen sensor from contamination?
A 3-stage contaminant-resistant plasma jet and deposit trap overcoat covers the element to protect against poisoning.
Published by the manufacturer of this part. Links open in a new tab.
- Installation instructions PDF
- Installation instructions PDF
- Brand image 1 Diagram
- Brand image 1 Diagram
- Brand image 2 Diagram
- Brand image 2 Diagram
- Brand image 3 Diagram
- Brand image 3 Diagram
- Brand image 4 Diagram
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review