Front Brake Caliper for 2000-2006 Toyota Tundra & More - TERREPOWER 97P01651A

$179.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 97P01651A
    UPC: 736749708999
    Condition: New
    Weight: 14.30 LBS
    Item Package Quantity: 1
    $179.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:97P01651A
    Nugeon Disc Brake Caliper P/N:97P01651A
    $179.99
    $179.99

    TERREPOWER 97P01651A front brake caliper for the 2000-2006 Toyota Tundra and other vehicles clamps the brake pads against the rotor to slow the wheel. It is a remanufactured fixed caliper, also called a disc brake caliper.

    • Fixed caliper design with four pistons
    • Steel pistons; piston 1 has a 45.31 mm outside diameter
    • Cast iron housing with an E-coated finish
    • Tube seat inlet fitting with an M10-1.0 inlet thread

    Quick facts

    • Part: TERREPOWER 97P01651A brake caliper
    • Also called: disc brake caliper
    • Fits: 2000-2006 Toyota Tundra and other vehicles
    • Position: Front right, front left
    • Material: Cast iron housing, steel pistons
    • Condition: Remanufactured

    A vehicle that pulls to one side under braking, wears one pad faster than its mate or shows fluid near the wheel can mean this caliper is worn. A collapsed brake hose or a damaged rotor can also be at fault, so pin down which one it is before you buy.

    Fits

    It fits as a brake caliper for the 2003-2004 Toyota 4Runner, the 2001-2007 Toyota Sequoia and the 2000-2006 Toyota Tundra, on either front side. This listing is one caliper, and both front sides are normally replaced together; the 2000-2006 Toyota Tundra takes one per side.

    Specifications

    Fit and size

    • Position: front right, front left
    • Quantity per application: 1
    • Piston quantity: 4
    • Piston 1 outside diameter: 45.31 mm (1.78 in); piston diameter: 45 mm (1.772 in)
    • Inlet fitting: tube seat, port thread M10-1.0 x 23.4
    • Bleeder screw thread: M7-1.0
    • Banjo bolt quantity: 1

    Build and materials

    • Caliper type: fixed
    • Housing material: cast iron
    • Piston material: steel
    • Finish: E-coated
    • Housing cast number: 13WL
    • Condition: remanufactured
    • Country of origin: Mexico

    In the box

    One caliper with its bleeder screw, caliper and pad hardware, slides, dust boots, mounting hardware and crush washers. Brake pads, the bracket, bracket mounting bolts, the mounting bolt, anti-squeal shims, wear sensors and the bleeder screw cap are not included, so plan on new mounting bolts rather than reusing the old ones.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Is this TERREPOWER 97P01651A one of the 2000-2006 Toyota Tundra brake calipers?

    Yes. The TERREPOWER 97P01651A is a front brake caliper for the 2000-2006 Toyota Tundra, and it fits the front left or the front right.

    Does the caliper bracket come with the TERREPOWER 97P01651A?

    No. The bracket and its mounting bolts are not included. The caliper comes with its slides, dust boots, caliper and pad hardware, crush washers and bleeder screw.

    What thread does the bleeder screw on this caliper use?

    The bleeder screw is M7-1.0, and it is included with the caliper. The bleeder screw cap is not included.

    How can I tell if a front caliper is wearing out?

    Pulling to one side when braking, one pad wearing faster than the other or fluid near the wheel can point to a worn caliper. A shop can confirm it.

    Is the TERREPOWER 97P01651A a fixed or a floating caliper?

    It is a fixed caliper. The TERREPOWER 97P01651A has four steel pistons in a cast iron housing with an E-coated finish.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review