Nugeon 99-00590A front left brake caliper for the 2007-2009 Nissan Altima and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured disc brake caliper is a floating type.
- Single steel piston, 57 mm in diameter
- Cast iron housing with a rust preventative finish
- Banjo bolt inlet fitting with an M10-1.0 x 27.32 port thread
Quick facts
- Part: Nugeon 99-00590A brake caliper
- Also called: disc brake caliper
- Fits: 2007-2009 Nissan Altima and other vehicles
- Position: Front left
- Material: Cast iron
- Condition: Remanufactured
Pulling to one side when braking, brake fluid near the dust boot or pads that wear unevenly can point to a failing caliper. A pull alone does not prove the caliper is at fault; a damaged brake hose, for example, can pull the same way. If the caliper is the cause, this one replaces it.
Fits
It is a direct-fit replacement for the 2007-2009 Nissan Altima and the 2007-2010 Nissan Sentra. This listing is one caliper for the front left; the front right is a separate part, and that axle's two calipers are normally replaced together.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
- Piston diameter: 57 mm (2.244 in)
- Piston quantity: 1
- Inlet port thread: M10-1.0 x 27.32 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured brake caliper for the front left, with its bracket, caliper slides, dust boots, bleeder screw, banjo bolt and crush washers. The front left takes one caliper, and the front right is ordered separately. Pads, anti-squeal shims, wear sensors, the bleeder screw cap, the caliper and pad hardware and the bracket mounting bolts are not included, so plan on new bracket bolts.
Frequently Asked Questions
Is this a caliper for the 2007-2009 Nissan Altima?
Yes. Nugeon 99-00590A is the front left brake caliper for the 2007-2009 Nissan Altima, and the front right is a separate part.
Is this a brake caliper for the 2007-2010 Nissan Sentra?
Yes, Nugeon 99-00590A fits the 2007-2010 Nissan Sentra on the front left side.
Does the Nugeon brake caliper come with pads?
No. Pads, anti-squeal shims and wear sensors are not included. The caliper comes with its bracket, slides, dust boots, bleeder screw, banjo bolt and crush washers.
What size piston does the Nugeon caliper have?
This caliper has one steel piston, 57 mm (2.244 in) in diameter, in a floating design.
What type of inlet fitting does the Nugeon 99-00590A use?
It uses a banjo bolt inlet with an M10-1.0 x 27.32 mm port thread. One banjo bolt and crush washers are included.
