Nugeon 99-00817B front right brake caliper for the 1999-2001 Hyundai Elantra and other vehicles clamps the brake pads against the rotor to slow the wheel. This caliper is remanufactured.
- Floating caliper design with one 54 mm steel piston
- Cast iron housing with a rust-preventative finish
- Banjo bolt inlet fitting with an M10-1.0 x 23.4 port thread
Quick facts
- Part: Nugeon 99-00817B brake caliper
- Also called: disc brake caliper
- Fits: 1999-2001 Hyundai Elantra and other vehicles
- Position: Front right
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
Brake fluid around the piston boot, a pull to one side under braking or unevenly worn pads can mean a caliper is sticking or leaking. With the engine off and the brakes cool, look over the caliper and brake hose for wetness first, since a leak or a pull can start elsewhere in the brake system.
Fits
It is a brake caliper for the 1999-2001 Hyundai Elantra and the 2000-2001 Hyundai Tiburon, one caliper for the front right of each. The front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity: 1 per front right position
- Piston outside diameter: 54 mm (2.126 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet fitting: Banjo bolt, port thread M10-1.0 x 23.4
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Housing cast number: BC141042 (right)
- Country of origin: Mexico
In the box
One remanufactured front right brake caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, bracket mounting bolts, anti-squeal shims, caliper and pad hardware, wear sensors and the bleeder screw cap are not included. The old mounting bolts may not be reusable, so plan on new ones.
Frequently Asked Questions
Is this a brake caliper replacement for the 1999-2001 Hyundai Elantra?
Yes. Nugeon 99-00817B is the front right caliper for the 1999-2001 Hyundai Elantra. The front left side is a separate part.
Is this a brake caliper for the front right of the 2000-2001 Hyundai Tiburon?
Yes. Nugeon 99-00817B fits the front right of the 2000-2001 Hyundai Tiburon, one caliper for that position.
What hardware comes with this Nugeon brake caliper?
The caliper comes with its bracket, slides, dust boots, bleeder screw and crush washers. Pads, bracket mounting bolts, shims, wear sensors and the bleeder screw cap are not included.
What size is the piston in this Nugeon caliper?
Nugeon 99-00817B has one steel piston, 54 mm (2.126 in) across, in a floating caliper.
What thread does the bleeder screw on this front right disc brake caliper use?
The bleeder screw is included and uses an M10-1.0 thread. The brake line connects through a banjo bolt inlet with an M10-1.0 x 23.4 port thread.
