Front Right Brake Caliper for 2007-2012 Hyundai Veracruz - Nugeon 99-00836A
Nugeon 99-00836A front right brake caliper for the 2007-2012 Hyundai Veracruz clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper replaces a front right caliper that leaks or no longer releases the pad.
- Floating caliper design with two steel pistons
- Cast iron caliper body
- Rust preventative finish on the caliper
- Banjo bolt inlet with an M10-1.0 x 23.4 inlet port thread
Quick facts
- Part: Nugeon 99-00836A brake caliper
- Also called: disc brake caliper
- Fits: 2007-2012 Hyundai Veracruz
- Position: Front right
- Material: Cast iron
- Condition: Remanufactured
A disc brake caliper that is sticking or leaking can show up as the car pulling to one side, brake fluid near the dust boot or a wheel that drags. These signs alone do not prove the caliper is the problem; worn pads can make a car pull as well.
Fits
It fits the 2007-2012 Hyundai Veracruz, which takes one caliper at the front right. This listing is one piece; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Piston outside diameter: 46 mm (1.811 in)
- Piston quantity: 2
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Caliper body material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One remanufactured caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included; plan on new mounting bolts, since the old ones may not be reusable.
Frequently Asked Questions
Does this front right caliper fit the 2007-2012 Hyundai Veracruz?
Yes. Nugeon 99-00836A is the front right caliper for the 2007-2012 Hyundai Veracruz. The front left side takes a separate part.
Does the Nugeon caliper come with brake pads?
No. This listing is one remanufactured caliper; brake pads, anti-squeal shims and wear sensors are not included. The bracket, slides, dust boots and bleeder screw are.
What are the piston size and bleeder thread on Nugeon 99-00836A?
Nugeon 99-00836A has two steel pistons with a 46 mm (1.811 in) outside diameter, and an M10-1.0 bleeder screw that is included.
Does this caliper come with the bracket bolts?
No. The bracket mounting bolts and the mounting bolt are not included, so plan on new bolts rather than reusing old ones. The bracket itself is included.
Is the Nugeon 99-00836A caliper a remanufactured part?
Yes. Nugeon 99-00836A is a remanufactured front right caliper with a rust preventative finish, and its country of origin is Mexico.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review