Rear Right Brake Caliper for 2008-2010 Hyundai Sonata - Nugeon 99-00854A

$149.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-00854A
    UPC: 736749362382
    Condition: New
    Weight: 5.80 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $149.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-00854A
    Nugeon Disc Brake Caliper P/N:99-00854A
    $149.99
    $149.99

    Nugeon 99-00854A rear right brake caliper for the 2008-2010 Hyundai Sonata clamps the brake pads against the rotor to slow the rear right wheel. This Nugeon brake caliper is a remanufactured unit with a floating design.

    • Single steel piston, 34 mm (1.339 in) in diameter
    • Cast iron housing with a rust-preventative finish
    • Banjo inlet fitting with an M10-1.0 x 23.4 inlet port thread
    • M10-1.0 bleeder screw included

    Quick facts

    • Part: Nugeon 99-00854A brake caliper
    • Also called: disc brake caliper
    • Fits: 2008-2010 Hyundai Sonata
    • Position: Rear right
    • Material: Cast iron
    • Condition: Remanufactured

    Fluid around the caliper, a pull to one side when braking or unevenly worn pads can mean a caliper is sticking or failing. These signs alone do not prove the caliper is at fault, since uneven tire pressure can also pull the car to one side. This listing is one caliper for the rear right, and the rear left is a separate part; both sides are normally replaced together. Each side of the rear axle takes one.

    Fits

    This is a direct-fit replacement caliper for the 2008-2010 Hyundai Sonata, rear right side.

    Specifications

    Fit and size

    • Position: Rear right
    • Quantity per application: 1
    • Piston quantity: 1
    • Piston diameter: 34 mm (1.339 in); outside diameter 33.88 mm (1.33 in)
    • Inlet port thread: M10-1.0 x 23.4
    • Bleeder screw thread: M10-1.0

    Build and materials

    • Caliper type: Floating
    • Inlet fitting: Banjo
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Housing cast number: BC140154
    • Condition: Remanufactured
    • Country of origin: Mexico

    In the box

    One remanufactured brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included; plan on new bolts, as the old ones may not be reusable.

    Frequently Asked Questions

    Is this Nugeon caliper the rear right for the 2008-2010 Hyundai Sonata?

    Yes. Nugeon 99-00854A is the rear right brake caliper for the 2008-2010 Hyundai Sonata. The rear left is a separate part.

    Does this disc brake caliper come with the bracket and hardware?

    Yes. Nugeon 99-00854A includes the bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims and wear sensors are not included.

    What thread size does the bleeder screw on this Nugeon 99-00854A use?

    The included bleeder screw is M10-1.0. The banjo inlet port thread is M10-1.0 x 23.4.

    How do I spot a leaking or sticking caliper on the rear brakes?

    Look for brake fluid around the caliper with the engine off and the brakes cool, and watch for a pull to one side or a dragging feel when braking. Have the brakes inspected promptly if you notice either.

    Does this remanufactured caliper have a cast number I can match?

    Yes. The housing carries cast number BC140154, and Nugeon 99-00854A is a floating caliper with a cast iron housing and a steel piston.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review