Rear Left Brake Caliper for 2008-2012 Honda Accord & More - Nugeon 99-00964B
Nugeon 99-00964B rear left brake caliper for the 2008-2012 Honda Accord and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper replaces a seized or leaking one at the rear left wheel.
- Floating caliper design with a single piston, 38.1 mm (1.5 in) in diameter
- Cast iron caliper casting with a steel piston and a rust-preventative finish
- Banjo inlet fitting with an M10-1.0 x 23.4 inlet port thread
- Bleeder screw included, with an M10-1.25 thread
Quick facts
- Part: Nugeon 99-00964B brake caliper
- Also called: disc brake caliper
- Fits: 2008-2012 Honda Accord and other vehicles
- Position: Rear left
- Material: Cast iron
- Condition: Remanufactured
A sticking or leaking caliper can show up as the car pulling to one side, pads wearing unevenly or brake fluid around the piston boot. Before you replace the caliper, rule out a collapsed brake hose, a seized slide or worn pads, since any of them can produce a similar pull.
Fits
This brake caliper fits the 2008-2012 Honda Accord and the 2009-2014 Acura TSX. Calipers on one axle are normally replaced as a pair, and this listing is a single rear left caliper; the rear right is a separate part. A 2008-2012 Honda Accord takes one caliper on the rear left.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1 at this position
- Piston diameter: 38.1 mm (1.5 in)
- Piston quantity: 1
- Inlet fitting: Banjo
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M10-1.25
Build and materials
- Condition: Remanufactured
- Caliper type: Floating
- Caliper casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Caliper manufacturer: Nissin
- Housing cast number: 10CLP 0249
- Bracket cast number: 250 CM
- Country of origin: Mexico
In the box
One rear left caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washer and pad hardware. Brake pads, wear sensors, anti-squeal shims, the bleeder screw cap and the bracket mounting bolts are not included; plan on new mounting bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1336
Frequently Asked Questions
Is this the rear brake caliper for the 2008-2012 Honda Accord?
Yes. Nugeon 99-00964B is made for the rear left position on the 2008-2012 Honda Accord. The rear right side is a separate caliper.
Is this the brake caliper for the 2009-2014 Acura TSX?
Yes. This rear left caliper fits the 2009-2014 Acura TSX, and the rear right side takes its own caliper.
What comes with this Nugeon caliper?
Nugeon 99-00964B includes the bracket, slides, dust boots, bleeder screw, crush washer and pad hardware. Pads, wear sensors, shims, the bleeder cap and bracket mounting bolts are not included.
What inlet and bleeder thread sizes does this disc brake caliper have?
The banjo inlet has an M10-1.0 x 23.4 port thread, and the bleeder screw is M10-1.25. The single piston measures 38.1 mm (1.5 in) across.
Can I keep driving with a leaking brake caliper?
No. A leaking or sticking caliper affects braking, so have the brakes checked and the caliper replaced promptly rather than driving on it.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review