Nugeon 99-00973A front left brake caliper for the 2012-2016 Honda CR-V clamps down on the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design, also called a disc brake caliper.
- Floating caliper design with a single steel piston
- Cast iron housing with a rust preventative finish
- Bracket, caliper slides and dust boots included
- Caliper and pad hardware included
- Bleeder screw, bleeder screw cap and banjo bolt crush washers included
Quick facts
- Part: Nugeon 99-00973A brake caliper
- Also called: disc brake caliper
- Fits: 2012-2016 Honda CR-V
- Position: Front left
- Material: Cast iron
- Condition: Remanufactured
Pulling to one side, a hot wheel or fluid around the dust boot can mean a sticking or leaking caliper. A worn rotor or a seized slide can be behind those signs too, so find the cause before buying. The front axle takes one caliper per side; this listing is the front left, the front right is ordered separately, and the two are normally replaced together.
Fits
This is a direct-fit replacement caliper for the 2012-2016 Honda CR-V.
Specifications
Fit and size
- Position: front left
- Quantity per application: 1
- Piston diameter: 57 mm (2.24 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt
- Inlet port thread: M10-1.0 x 23.4
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Housing material: cast iron
- Piston material: steel
- Finish: rust preventative
- Housing cast numbers: 5735, 5741, 5752
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw, bleeder screw cap and banjo bolt crush washers. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included, so plan on new mounting bolts.
Interchange / FMSI:
FMSI: D914
Frequently Asked Questions
Is the Nugeon 99-00973A the right 2012-2016 Honda CR-V caliper for the front left?
Yes. Nugeon 99-00973A is the front left brake caliper for the 2012-2016 Honda CR-V. The front right side is a separate part.
Does the Nugeon caliper come with brake pads or bracket bolts?
No. Pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included. The bracket, slides, dust boots, hardware, bleeder screw and cap are.
What size is the piston on this caliper?
Nugeon 99-00973A has one steel piston measuring 57 mm (2.24 in) across, in a floating caliper design.
How can I tell if a front caliper is sticking or leaking?
Fluid around the dust boot or banjo fitting, pulling to one side when braking, or a hot wheel and burning smell after driving can point to a caliper problem. A shop can test it.
What thread does the inlet on this caliper use?
The inlet is a banjo bolt fitting with an M10-1.0 x 23.4 port thread, and crush washers are included. The bleeder screw is M10-1.0.
