Rear Right Brake Caliper for 2003-2006 Kia Sorento - Nugeon 99-01819B

$158.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-01819B
    UPC: 736749373319
    Condition: New
    Weight: 9.50 LBS
    Sold as: 1 per side of the rear axle
    Part Has Core (Y/N): N
    $158.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-01819B
    Nugeon Disc Brake Caliper P/N:99-01819B
    $158.99
    $158.99

    Nugeon 99-01819B rear right brake caliper for the 2003-2006 Kia Sorento clamps the pads onto the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, uses brake fluid pressure to drive its piston.

    • Floating caliper design
    • Single steel piston, 45 mm (1.772 in) in diameter
    • Cast iron housing with a rust-preventative finish
    • Banjo bolt inlet fitting with an M10-1.0 x 23.4 inlet port thread

    Quick facts

    • Part: Nugeon 99-01819B brake caliper
    • Also called: disc brake caliper
    • Fits: 2003-2006 Kia Sorento
    • Position: Rear right
    • Material: Cast iron
    • Condition: Remanufactured

    Pulling to one side, a burning smell after driving or a brake that drags can mean this caliper is worn or sticking, though a collapsed rear brake hose or worn rear pads can be behind the same signs, so find the cause before you replace it. Have any brake problem looked at promptly.

    Fits

    This is a brake caliper for the 2003-2006 Kia Sorento, made for the rear right wheel. The car takes one on each side of the rear axle; this listing is the right side only, and the left side is a separate caliper that is normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Rear right
    • Quantity: 1 per side of the rear axle
    • Piston outside diameter: 45 mm (1.772 in)
    • Piston quantity: 1
    • Bleeder screw thread: M10-1.0
    • Inlet port thread: M10-1.0 x 23.4 mm
    • Inlet fitting: Banjo bolt
    • Housing cast numbers: BC140078, R

    Build and materials

    • Caliper type: Floating
    • Condition: Remanufactured
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Country of origin: Mexico

    In the box

    One caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included, so plan on new mounting bolts; the old ones may not be reusable.

    Frequently Asked Questions

    Is this Nugeon 99-01819B a rear brake caliper for the 2003-2006 Kia Sorento?

    Yes. Nugeon 99-01819B is the rear right caliper for the 2003-2006 Kia Sorento. The rear left side needs its own caliper.

    Does the Nugeon caliper come with the bracket and pads?

    Yes to the bracket, no to the pads. Nugeon 99-01819B also includes the caliper slides, dust boots, bleeder screw and crush washers; anti-squeal shims, wear sensors and bracket mounting bolts are not included.

    What thread size is the bleeder screw on this caliper?

    The bleeder screw is M10-1.0 and is included; the bleeder screw cap is not. The banjo bolt inlet port thread is M10-1.0 x 23.4 mm.

    What can I look for on a worn rear caliper?

    With the engine off and cool, a torn dust boot, rust or fluid on the caliper body, or pads worn unevenly can point to a problem. A shop can test the hydraulics.

    Is the Nugeon 99-01819B caliper new or remanufactured?

    It is remanufactured, with a cast iron housing, a steel piston and a rust-preventative finish. The country of origin is Mexico.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review