Nugeon Disc Brake Caliper P/N:99-01137B
Nugeon 99-01844A rear right brake caliper for the 2011-2016 Kia Optima and other vehicles squeezes the pads against the rotor to slow the wheel. This is a remanufactured floating caliper with a single piston.
A sticking or leaking caliper can show up as the car pulling to one side, a drag felt after driving, or brake fluid near the wheel. Before you replace the caliper, rule out worn pads and a damaged brake hose, since those can produce a similar pull or drag.
This caliper fits the 2011-2016 Kia Optima and the 2012-2017 Hyundai Azera. The listing is one caliper for the rear right; the rear left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One remanufactured rear right brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washers; the rear right side takes one. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new bolts.
Is the Nugeon 99-01844A a Kia Optima brake caliper for the 2011-2016 model years?
Yes. Nugeon 99-01844A is the rear right caliper for the 2011-2016 Kia Optima, and it also fits the 2012-2017 Hyundai Azera.
Does this Nugeon caliper come with the bracket and bleeder screw?
Yes. Nugeon 99-01844A includes the mounting bracket, slides, dust boots, bleeder screw and crush washers. Pads, shims, wear sensors and bracket mounting bolts are not included.
Is this Nugeon brake caliper a floating or fixed design?
It is a floating caliper with one steel piston 38 mm (1.496 in) across, in a cast iron housing.
What can a sticking rear caliper look like on the road?
Pulling to one side, a dragging feel after driving or brake fluid near the wheel can mean a caliper problem. Have the brakes checked promptly, because a shop can confirm the cause.
What are the inlet and bleeder thread sizes on this disc brake caliper?
The bleeder screw thread is M10-1.0, and the banjo bolt inlet port is M10-1.0 x 23.4 mm. Nugeon 99-01844A uses a banjo bolt inlet fitting.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.