Nugeon 99-01852B rear left brake caliper for the 2014-2020 Kia Sorento and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating-type disc brake caliper.
A rear left caliper that sticks or leaks can show up as the vehicle pulling to one side, a burning smell or fluid around the piston boot. Worn pads, a seized slide, a soft brake hose or a worn rotor can be behind those symptoms too, so find the cause before buying. The 2014-2020 Kia Sorento takes one caliper at the rear left; the rear right is a separate part ordered on its own, and the two are normally replaced together.
The 2014-2020 Kia Sorento, the 2013-2016 Hyundai Santa Fe and the 2013-2018 Hyundai Santa Fe Sport take this caliper, and so do other vehicles. If your car isn't named, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One caliper with its bracket, slides, dust boots, bleeder screw and cap, caliper and pad hardware, and crush washers. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included, so plan on new bolts for the bracket.
Interchange / FMSI:
FMSI: D1284
Is this a rear brake caliper for the 2014-2020 Kia Sorento?
Yes. Nugeon 99-01852B is the rear left caliper for the 2014-2020 Kia Sorento; the rear right is a separate part. Owners of other models can look up their year in the "Vehicles it fits" section.
Is this a brake caliper for the 2013-2016 Hyundai Santa Fe?
Yes. Nugeon 99-01852B fits the rear left position of the 2013-2016 Hyundai Santa Fe, and that position takes one caliper.
What comes with the Nugeon caliper?
It comes with the bracket, slides, dust boots, bleeder screw and cap, caliper and pad hardware, and crush washers. Pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included.
What piston size does this floating brake caliper have?
This rear left caliper has one steel piston, 43 mm (1.69 in) across, in an aluminum floating-type casting with an M10-1.0 bleeder screw thread.
What signs show a rear caliper is sticking or leaking?
A sticking caliper can show as pulling to one side, a burning smell or uneven pad wear, and a leak as brake fluid around the piston boot. Brakes with these signs need prompt attention.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
