Nugeon 99-02351B front left brake caliper for the 2008-2010 BMW 535i and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design with a single aluminum piston.
A worn or failing caliper can show up as the car pulling to one side, brake fluid around the piston boot, or pads wearing unevenly. Those signs can also come from other brake parts, so with the engine off and the car cool, look for fluid wetness around the boot and bleeder screw first, and leave pressure tests to a shop.
This front left caliper fits the 2008-2010 BMW 535i, the 2006-2010 BMW 550i and the 2006-2010 BMW 650i, along with other BMW models. If your car is not one of these, open the "Vehicles it fits" section to check your exact model and engine. The 2008-2010 BMW 535i takes one at the front left; this listing is one caliper, the front right is a separate part, and the pair is normally replaced together.
Fit and size
Build and materials
One remanufactured front left caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included, so plan on new mounting bolts, since the old ones may not be reusable.
Is this the front left BMW 535i brake caliper for 2008-2010 cars?
Yes. Nugeon 99-02351B is a front left caliper for the 2008-2010 BMW 535i and also fits the 2006-2010 BMW 550i. Open the "Vehicles it fits" section to check your exact model and engine.
Does the Nugeon caliper come with brake pads?
No. This listing is one remanufactured caliper with its bracket, slides, dust boots, bleeder screw and crush washers. Pads, anti-squeal shims and wear sensors are not included.
What size is the piston on this disc brake caliper?
Nugeon 99-02351B has a single aluminum piston, 60 mm (2.362 in) across, in a floating caliper design.
What can a leaking or sticking front left brake caliper look like?
Brake fluid around the piston boot, the car pulling to one side or uneven pad wear can be signs of a caliper problem, though other parts can cause them too. A shop can test it.
Which cast numbers are on this remanufactured caliper?
The caliper housing carries cast numbers 60/30/348 and 77, and the bracket carries cast number 556.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
