Nugeon 99-02389B front left brake caliper for the 2007-2008 BMW 328i and other vehicles squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper has a floating body.
Pulling to one side, a burning smell from one wheel or uneven pad wear can mean a caliper is sticking, though pads and hoses can show similar signs. Before replacing it, look at the front left caliper with the engine off and the brakes cool for wet fluid or a torn dust boot; a shop can test the rest.
This front left brake caliper fits the 2007-2008 BMW 328i, the 2007-2008 BMW 328xi and the 2006 BMW 325i, plus other vehicles. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine. The listing is one caliper: a 2007-2008 BMW 328i takes one at the front left, the front right is a separate part ordered on its own, and the two sides are normally replaced together.
Fit and size
Build and materials
One remanufactured caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Is this a BMW 328i brake caliper for the 2007-2008 model years?
Yes. Nugeon 99-02389B is the front left caliper for the 2007-2008 BMW 328i. For another model or engine, open the "Vehicles it fits" section.
Is this the BMW 325i brake caliper for the 2006 model year?
Yes. Nugeon 99-02389B fits the 2006 BMW 325i at the front left. The front right caliper is a separate part.
Does the Nugeon caliper come with the bracket and pads?
Yes for the bracket, no for the pads. The caliper comes with the bracket, slides, dust boots, bleeder screw and crush washers; pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included.
Is this disc brake caliper floating or fixed, and what size is the piston?
It is a floating caliper with one aluminum piston, 57 mm (2.244 in) across.
What thread does the bleeder screw on this front left caliper use?
The bleeder screw uses an M10-1.0 thread and is included with the caliper. The bleeder screw cap is not included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
