Nugeon 99-02401B rear left brake caliper for the 2007-2015 Mini Cooper squeezes the brake pads against the rotor to slow the wheel. This is a remanufactured Nugeon brake caliper, also called a disc brake caliper.
- Floating caliper design with a single steel piston
- Aluminum caliper casting
- Rust-preventative finish on the caliper
Quick facts
- Part: Nugeon 99-02401B brake caliper
- Also called: disc brake caliper
- Fits: 2007-2015 Mini Cooper
- Position: Rear left
- Material: Aluminum caliper casting, steel piston
- Condition: Remanufactured
Pulling to one side under braking, uneven pad wear or fluid around the rear wheel can come from a caliper that sticks or leaks. A worn rotor, tired pads or a damaged brake hose can be behind these signs too, so find the cause before buying a caliper.
Fits
This brake caliper is a direct-fit replacement for the rear left position of the 2007-2015 Mini Cooper.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1 for this side
- Piston outside diameter: 36.02 mm (1.42 in)
- Bleeder screw thread: M10-1.0
- Inlet port thread: M10-1.0
- Housing cast numbers: 1956, 36
Build and materials
- Caliper type: Floating, one piston
- Casting material: Aluminum
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, bleeder screw, pad hardware and crush washers. Brake pads, wear sensors, anti-squeal shims, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new bracket bolts. This listing is one caliper for the rear left, and that side takes one; the rear right is a separate part ordered separately, and both sides are normally replaced together.
Frequently Asked Questions
Is this a rear caliper for the left side of the 2007-2015 Mini Cooper?
Yes. Nugeon 99-02401B is the rear left brake caliper for the 2007-2015 Mini Cooper. The rear right side takes its own caliper, sold separately.
Does this Nugeon caliper come with the bracket and brake pads?
Yes to the bracket, no to the pads. Nugeon 99-02401B includes the bracket, caliper slides, dust boots, bleeder screw and crush washers; pads, wear sensors, shims and bracket mounting bolts are not included.
Is this caliper floating or fixed?
It is a floating caliper with one steel piston that measures 36.02 mm (1.42 in) across, held in an aluminum casting.
What happens when a rear brake caliper starts to stick or leak?
A sticking or leaking caliper can show up as pulling to one side, uneven pad wear or fluid near the wheel. Have the brakes checked promptly if you notice any of these.
What thread size do the bleeder screw and brake line port use?
On the Nugeon 99-02401B, both the bleeder screw and the inlet port use an M10-1.0 thread. The housing cast numbers are 1956 and 36.
