Nugeon Disc Brake Caliper P/N:99-01137B
Nugeon 99-02437B rear right brake caliper for the 2015-2018 BMW X4 and other vehicles presses the brake pads against the rotor to slow the wheel. It is a remanufactured unit with its own mounting bracket.
A sticking or leaking caliper can show up as the car pulling to one side, a dragging brake or a pad wearing faster than its mate. Worn pads, a damaged rotor or a collapsed brake hose can be behind those signs too, so find the cause before you buy a caliper.
This caliper is a direct-fit replacement for the 2015-2018 BMW X4. It is also a brake caliper for the 2012-2017 BMW X3, and either car takes one at the rear right. This listing is one caliper; the rear left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw, crush washers and caliper and pad hardware. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new bolts, as the old ones may not be reusable.
Does the Nugeon 99-02437B fit the 2015-2018 BMW X4 on the rear right?
Yes. Nugeon 99-02437B is a rear right brake caliper for the 2015-2018 BMW X4, and it also fits the 2012-2017 BMW X3.
Does the Nugeon caliper come with brake pads?
No. Pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included. The bracket, slides, dust boots, bleeder screw, crush washers and hardware are.
Is this disc brake caliper a floating or fixed design?
Floating. Nugeon 99-02437B is a floating caliper with a cast iron body and one steel piston, 42 mm (1.654 in) across.
How does a sticking rear right brake caliper show up while driving?
A sticking caliper can make the car pull to one side, drag, or wear one pad faster than the other. Fluid around the dust boot can mean a leak; a shop can confirm the cause.
What thread size do the bleeder screw and inlet port use on this Nugeon brake caliper?
Both the bleeder screw and the inlet port use M10-1.0 threads on the Nugeon 99-02437B, and the bleeder screw is included with the caliper.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.