Rear Left Brake Caliper for 2000 Volkswagen Jetta & More - Nugeon 99-03321B
Nugeon 99-03321B rear left brake caliper for the 2000 Volkswagen Jetta and other vehicles squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is made for replacing a rear left caliper that sticks or leaks.
- Floating caliper design with a single steel piston
- Aluminum casting with a rust preventative finish
- Banjo-style inlet fitting for the brake hose connection
Quick facts
- Part: Nugeon 99-03321B brake caliper
- Also called: disc brake caliper
- Fits: 2000 Volkswagen Jetta and other vehicles
- Position: Rear left
- Material: Aluminum (casting), steel (piston)
- Condition: Remanufactured
A sticking or leaking disc brake caliper can show up as the car pulling to one side, uneven pad wear or brake fluid around the wheel. Before you replace it, rule out worn pads, a collapsed brake hose and a stuck caliper slide, since each can cause a similar pull or drag.
Fits
This listing is one caliper for the rear left; the rear right is a separate part, and since one goes on each side of the axle, both sides are normally done together. It is listed for a wide range of Volkswagen and Audi models, including the 2000 Volkswagen Jetta, the 2008-2009 Volkswagen Golf City and a brake caliper for the 2000 Audi TT. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston outside diameter: 38.07 mm (1.5 in)
- Inlet fitting: Banjo
- Inlet port thread: M12-1.0 x 20.9 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting and caliper mounting bolts are not included, so plan on new bolts.
Frequently Asked Questions
Does this caliper fit a 2000 Volkswagen Jetta?
Yes, Nugeon 99-03321B is listed for the 2000 Volkswagen Jetta on the rear left. Use the "Vehicles it fits" section to check your exact model and engine.
Does the Nugeon caliper come with the bracket and pads?
Yes, the bracket is included, but brake pads are not. Slides, dust boots, hardware, a bleeder screw and crush washers come with it; anti-squeal shims, wear sensors and mounting bolts do not.
What size is the piston and inlet thread on this rear left caliper?
Nugeon 99-03321B has one steel piston, 38.07 mm (1.5 in) across, and an inlet port thread of M12-1.0 x 20.9 mm for the banjo fitting.
How can I tell if a rear caliper is sticking?
Common signs are the car pulling to one side, a dragging feel or fluid near the wheel. Have the brakes inspected promptly, since a shop can confirm the cause.
What is this remanufactured caliper made of?
The body is an aluminum casting with a steel piston and a rust preventative finish. It is a floating caliper made in Mexico.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review