Nugeon 99-03342B front right brake caliper for the 2005-2018 Volkswagen Jetta and other vehicles squeezes the pads against the rotor to slow the wheel. Also called a disc brake caliper, this Nugeon brake caliper is remanufactured and fits the front right wheel.
- Floating design with a single steel piston
- Cast iron housing with a rust-preventative finish
- Banjo bolt inlet fitting
- Housing cast number 581 VL and bracket cast number 801
Quick facts
- Part: Nugeon 99-03342B brake caliper
- Also called: disc brake caliper
- Fits: 2005-2018 Volkswagen Jetta and other vehicles
- Position: Front right
- Material: Cast iron
- Condition: Remanufactured
A worn or sticking caliper can show up as the car pulling to one side under braking, pads worn unevenly or fluid wetness around the piston boot. A brake hose or tire problem can produce a pull as well, so find the cause before you replace the caliper: when the wheel is off for a brake service, look at the boot for fluid and at the pads for wear that is heavier on one side.
Fits
Besides the 2005-2018 Volkswagen Jetta, it fits the 2010-2014 Volkswagen Golf and the 2012-2019 Volkswagen Beetle, among many other vehicles. If your car is not one of these, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: front right
- Quantity per application: 1
- Piston diameter: 54 mm (2.13 in)
- Piston quantity: 1
- Inlet port thread: M10-1.5 x 23.14 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Housing material: cast iron
- Piston material: steel
- Finish: rust preventative
- Inlet fitting: banjo bolt
- Country of origin: Mexico
In the box
One remanufactured caliper with its bracket, slides, pad hardware, dust boots, bleeder screw with cap and crush washer(s). Pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable. This listing is one caliper for the front right, which takes one; the front left is a separate part ordered separately, and the two sides are normally replaced together.
Interchange / FMSI:
FMSI: D1107
Frequently Asked Questions
Is this the right caliper for a 2005-2018 Volkswagen Jetta?
Yes. Nugeon 99-03342B is a front right caliper for the 2005-2018 Volkswagen Jetta; the front left is a separate part. Open the "Vehicles it fits" section to check your exact engine.
Will this work as a Golf brake caliper on a 2010-2014 Volkswagen Golf?
Yes. This front right brake caliper fits the 2010-2014 Volkswagen Golf. It goes on the right front wheel only, so the left front needs its own caliper.
Does this Nugeon caliper come with brake pads?
No. Nugeon 99-03342B includes the bracket, slides, pad hardware, dust boots, bleeder screw with cap and crush washer(s). Pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included.
What piston size and inlet thread does this caliper have?
The steel piston is 54 mm (2.13 in) across, and the banjo bolt inlet port is M10-1.5 x 23.14 mm. The bleeder screw thread is M10-1.0.
Can a sticking front right caliper make a car pull to one side?
It can. A caliper that does not apply or release evenly may pull the car toward one side when braking, wear the pads unevenly or leak fluid at the boot; a shop can test it.
