Nugeon 99-17284A rear right brake caliper for the 1995-1999 Chevrolet Lumina and other vehicles squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon caliper, also called a disc brake caliper, is a floating type.
- One 38 mm (1.5 in) steel piston
- Cast iron housing with a rust-preventative finish
- Banjo bolt inlet with an M10-1.5 x 23.14 port thread
- Bleeder screw sized M10-1.5 x 29.5
Quick facts
- Part: Nugeon 99-17284A brake caliper
- Also called: disc brake caliper
- Fits: 1995-1999 Chevrolet Lumina and other vehicles
- Position: Rear right
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
A caliper that leaks fluid, drags or lets the car pull to one side can be worn out, though a swollen brake hose or uneven pad wear can be behind those signs too, so rule them out first. Replace the rear calipers as a pair. This listing is one caliper for the rear right, and the rear left is a separate part. The rear axle takes one caliper on each side.
Fits
This rear right brake caliper is a direct-fit replacement for the 1995-1999 Chevrolet Lumina, the 1995-1999 Chevrolet Monte Carlo and the 1997 Oldsmobile Cutlass. Own a different car? Look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston diameter: 38 mm (1.5 in)
- Piston quantity: 1
- Inlet port thread: M10-1.5 x 23.14
- Bleeder screw: M10-1.5 x 29.5
- Banjo bolt quantity: 1
Build and materials
- Type: Floating, remanufactured
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Housing cast numbers: AD38P, 3801, 38671
- Bracket cast number: 3804
- Country of origin: Mexico
In the box
One caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washers, and caliper and pad hardware. Pads, anti-squeal shims, wear sensors, the bleeder screw cap, the bracket mounting bolts and the mounting bolt are not included. Plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D508
Frequently Asked Questions
Are these Monte Carlo brake calipers right for the 1995-1999 Chevrolet Monte Carlo?
Yes. Nugeon 99-17284A is the rear right caliper for the 1995-1999 Chevrolet Monte Carlo. The rear left is a separate caliper.
Does this Nugeon brake caliper come with pads?
No. Nugeon 99-17284A does not include pads, anti-squeal shims or wear sensors. It does come with the bracket, slides, dust boots and bleeder screw.
What size is the piston in this rear right caliper?
The single steel piston is 38 mm (1.5 in) across. The caliper is a floating type with a cast iron housing.
What are signs a floating brake caliper is sticking or leaking?
During a brake service, look for fluid wetness around the caliper, a torn dust boot or pads worn unevenly. A shop can test a caliper that drags.
What thread does the inlet on this caliper use?
The inlet is a banjo bolt fitting with an M10-1.5 x 23.14 port thread, and this rear right caliper takes one banjo bolt; the rear left is ordered separately. Crush washers are included.
