Nugeon 99-17495B rear brake caliper for the 2018-2024 Chevrolet Equinox and other vehicles is a floating caliper that presses the pads against the rotor. This Nugeon brake caliper is a remanufactured unit.
- Single steel piston, 38 mm across
- Cast iron casting with a rust-preventative finish
- Banjo bolt inlet fitting with M10 - 1.0 thread
- Cast numbers 6602 38 on the housing and TRW 182146 A on the bracket
Quick facts
- Part: Nugeon 99-17495B brake caliper
- Also called: disc brake caliper
- Fits: 2018-2024 Chevrolet Equinox and other vehicles
- Position: Rear right, rear left
- Material: Cast iron casting, steel piston
- Condition: Remanufactured
A worn or failing caliper can show up as the car pulling to one side under braking, fluid around the piston boot or uneven pad wear. Before you replace it, rule out worn pads, seized slides and a restricted brake hose, which can look like a bad caliper from the driver's seat. This listing is one caliper, sold individually; the 2018-2024 Chevrolet Equinox takes one per application, and both rear calipers are normally replaced together.
Fits
It is a direct-fit replacement for the 2018-2024 Chevrolet Equinox and the 2016-2024 Chevrolet Malibu, and a brake caliper for the 2017-2019 Buick LaCrosse. If your car isn't named here, look it up by year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: rear right, rear left
- Quantity per application: 1
- Piston outside diameter: 38 mm (1.5 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, M10 - 1.0 thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Casting material: cast iron
- Piston material: steel
- Finish: rust preventative
- Condition: remanufactured
- Country of origin: Mexico
In the box
One caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw, bleeder screw cap and crush washers. Brake pads, anti-squeal shims, wear sensors and mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1857
Frequently Asked Questions
Is this a 2016-2024 Chevy Malibu brake caliper for the rear axle?
Yes. Nugeon 99-17495B is listed for the 2016-2024 Chevrolet Malibu at the rear right and rear left. For another car, look it up in the "Vehicles it fits" section.
Does this work as a 2018-2024 Chevy Equinox brake caliper on the back wheels?
Yes. This rear brake caliper is listed for the 2018-2024 Chevrolet Equinox, and it works for both the rear right and rear left positions.
Does the Nugeon caliper come with brake pads?
No. Pads, anti-squeal shims, wear sensors and mounting bolts are not included. The caliper does come with its bracket, slides, dust boots, pad hardware, bleeder screw and crush washers.
Does this disc brake caliper include a bleeder screw, and what thread does it use?
Yes. Nugeon 99-17495B includes the bleeder screw and its cap, and the thread is M10-1.0. The banjo bolt inlet uses an M10 - 1.0 thread.
How big is the piston on this Nugeon rear caliper, and is it a floating design?
Yes, it is a floating caliper with one steel piston that measures 38 mm (1.5 in) across.
