Nugeon 99-17714B front brake caliper for the 2006-2011 Dodge Charger and other vehicles squeezes the pads against the rotor to slow the wheel. This Nugeon brake caliper is remanufactured and uses a floating design.
- Two pistons, each 42 mm across, made of phenolic
- Aluminum caliper casting with a rust preventative finish
- Banjo bolt inlet fitting with an M10-1.5 thread
- Remanufactured caliper housing with cast number K247-185C
Quick facts
- Part: Nugeon 99-17714B brake caliper
- Also called: disc brake caliper
- Fits: 2006-2011 Dodge Charger and other vehicles
- Position: Front right, front left
- Material: Aluminum
- Condition: Remanufactured
Pulling to one side under braking, uneven pad wear or fluid around the piston boot can mean the caliper is worn, though a collapsed brake hose or a seized slide pin can be behind the same signs. Replace the calipers on both front wheels together; this listing is one caliper.
Fits
The cars it fits include the 2005-2011 Chrysler 300 and the 2006-2011 Dodge Charger, and among Challenger brake calipers it covers the 2009-2011 Dodge Challenger; each front wheel takes one caliper.
Specifications
Fit and size
- Position: front right, front left
- Quantity per application: 1
- Pistons: 2
- Piston diameter: 42 mm (1.654 in)
- Inlet port thread: M10-1.5 x 26.92 mm
- Bleeder screw thread: M10-1.5
Build and materials
- Caliper type: floating
- Casting material: aluminum
- Piston material: phenolic
- Finish: rust preventative
- Condition: remanufactured
- Housing cast number: K247-185C
- Country of origin: Mexico
In the box
One caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washers and caliper and pad hardware. Brake pads, bracket mounting bolts, anti-squeal shims, wear sensors and the bleeder screw cap are not included, so plan on new bolts.
Frequently Asked Questions
Is this a Dodge Charger brake caliper for the 2006-2011 model years?
Yes. Nugeon 99-17714B fits the 2006-2011 Dodge Charger at either front wheel, and each wheel takes one caliper.
Can I use this as a Chrysler 300 brake caliper on a 2005-2011 car?
Yes, the 2005-2011 Chrysler 300 is on the fitment list. If your car is another model, look it up in the "Vehicles it fits" section on this page.
Does the Nugeon caliper come with brake pads?
No. The Nugeon 99-17714B leaves out pads, bracket mounting bolts, anti-squeal shims, wear sensors and the bleeder screw cap; the bracket, slides, dust boots, bleeder screw and crush washers come with it.
How many pistons does this brake caliper have and what size are they?
It has two phenolic pistons, each 42 mm (1.654 in) across, in a floating caliper.
What brake hose connection does this disc brake caliper use?
A banjo bolt inlet with an M10-1.5 thread, and crush washers are included. The bleeder screw uses the same M10-1.5 thread.
