Front Right Brake Caliper for 2007-2012 Dodge Caliber - Nugeon 99-17733B

$140.99

Vehicles this part fits

    Part number: 99-17733B
    UPC: 736749388573
    Condition: New
    Weight: 9.50 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $140.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-17733B
    Nugeon Disc Brake Caliper P/N:99-17733B
    $140.99
    $140.99

    Nugeon 99-17733B front right brake caliper for the 2007-2012 Dodge Caliber clamps the pads against the rotor to slow the front right wheel. This remanufactured Nugeon brake caliper works like any disc brake caliper, using fluid pressure on its piston.

    • Floating caliper with a single 57 mm steel piston
    • Cast iron housing with a rust preventative finish
    • Mounting bracket, caliper slides and dust boots included
    • Bleeder screw and crush washers included
    • Banjo bolt inlet fitting with an M10-1.0 x 23.4 port thread

    Quick facts

    • Part: Nugeon 99-17733B brake caliper
    • Also called: disc brake caliper
    • Fits: 2007-2012 Dodge Caliber
    • Position: Front right
    • Material: Cast iron (housing), steel (piston)
    • Condition: Remanufactured

    A sticking or leaking caliper can show up as the car pulling to one side under braking, uneven pad wear across the axle, or fluid around the dust boot. Before replacing it, check the hose, boot and slides for seepage or rust during a brake service, since a seized slide or swollen hose can also cause pulling and uneven wear.

    Fits

    This listing is one brake caliper for the front right of the 2007-2012 Dodge Caliber, a direct-fit replacement. One caliper goes on each side of the axle, so the front left is a separate part, and the pair on that axle is normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity per application: 1
    • Piston: one, 57 mm (2.244 in) diameter
    • Inlet port thread: M10-1.0 x 23.4 (banjo bolt)
    • Bleeder screw thread: M7-1.0
    • Housing and bracket cast number: 5739

    Build and materials

    • Caliper type: Floating
    • Condition: Remanufactured
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Country of origin: Mexico

    In the box

    One caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, a bleeder screw cap, wear sensors, pad hardware and mounting bolts are not included, so plan on new bolts.

    Frequently Asked Questions

    Does the Nugeon 99-17733B front right caliper fit the 2007-2012 Dodge Caliber?

    Yes. Nugeon 99-17733B is the front right caliper for the 2007-2012 Dodge Caliber; the front left side takes a separate caliper.

    Does the Nugeon caliper come with brake pads?

    No. This Nugeon 99-17733B caliper comes with its bracket, slides, dust boots, bleeder screw and crush washers, but not pads, shims, wear sensors or bracket bolts.

    What thread sizes does this brake caliper use for the hose and bleeder?

    This caliper has a banjo bolt inlet with an M10-1.0 x 23.4 port thread, and the bleeder screw thread is M7-1.0.

    What signs can point to a failing front right brake caliper?

    The car can pull to one side when braking, the pads can wear unevenly from side to side, or brake fluid can show around the dust boot or piston.

    Is Nugeon 99-17733B a floating or fixed caliper?

    Nugeon 99-17733B is a floating caliper with one 57 mm steel piston. The caliper slides are included.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review