Front Brake Caliper for 2018-2024 Jeep Wrangler & More - Nugeon 99-17768B

$189.99
WARNING:California Proposition 65▾

Vehicles this part fits

    $189.99
    Adding to cart… The item has been added

    Have questions?

    Part number: 99-17768B
    Part Has Core (Y/N): N
    Nugeon Disc Brake Caliper P/N:99-17768B
    Nugeon Disc Brake Caliper P/N:99-17768B
    $189.99
    $189.99

    Nugeon 99-17768B front brake caliper for the 2018-2024 Jeep Wrangler and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating disc brake caliper for the front brakes.

    • Two phenolic pistons
    • Cast iron casting with a rust-preventative finish
    • Banjo inlet fitting with an M10-1.0 x 23.4 mm inlet port thread
    • Housing cast number 17986801 L and bracket cast number 17986501 WF8

    Quick facts

    • Part: Nugeon 99-17768B brake caliper
    • Also called: disc brake caliper
    • Fits: 2018-2024 Jeep Wrangler and other vehicles
    • Position: Front right, front left
    • Material: Cast iron
    • Condition: Remanufactured

    A sticking or leaking caliper can show up as the vehicle pulling to one side, uneven pad wear or brake fluid around the wheel. Before you replace this caliper, rule out worn pads, a seized slide or a damaged hose as the cause. This listing is one caliper, and the front calipers are normally replaced as a pair.

    Fits

    This caliper is listed for a wide range of Jeep, Dodge and Chrysler models, among them the 2018-2024 Jeep Wrangler, the 2012-2020 Dodge Grand Caravan and the 2012-2016 Chrysler Town & Country. The fitment counts one caliper per application.

    Specifications

    Fit and size

    • Position: front right, front left
    • Quantity per application: 1
    • Piston quantity: 2
    • Piston outside diameter: 50.98 mm (2.01 in)
    • Piston diameter: 51 mm (2.008 in)
    • Inlet port thread: M10-1.0 x 23.4 mm
    • Bleeder screw thread: M10-1.0

    Build and materials

    • Caliper type: floating
    • Casting material: cast iron
    • Piston material: phenolic
    • Finish: rust preventative
    • Condition: remanufactured
    • Country of origin: Mexico

    In the box

    One caliper with its mounting bracket, caliper slides, dust boots, bleeder screw, crush washers, and caliper and pad hardware. Pads, wear sensors, anti-squeal shims, a bleeder screw cap, bracket mounting bolts and a mounting bolt are not included, so plan on new bolts because the old ones may not be reusable.

    Interchange / FMSI:

    FMSI: D1589

    Frequently Asked Questions

    Is this the right 2018-2024 Jeep Wrangler brake caliper?

    Yes. Nugeon 99-17768B is listed for the 2018-2024 Jeep Wrangler, front right and front left, and for many other vehicles. If your car is a different one, look it up in the "Vehicles it fits" section.

    Does this Nugeon caliper come with the mounting bracket?

    Yes. The Nugeon 99-17768B caliper includes the mounting bracket, caliper slides and dust boots. Pads, wear sensors and bracket mounting bolts are not included.

    What size and material are the pistons in this front brake caliper?

    This caliper has two phenolic pistons with a 51 mm (2.008 in) piston diameter.

    What thread does the banjo inlet on this caliper use?

    The inlet port thread is M10-1.0 x 23.4 mm. The bleeder screw is M10-1.0 and is included with the caliper.

    Is the Nugeon 99-17768B floating or fixed, and what is the housing made of?

    It is a floating caliper with a cast iron casting and a rust-preventative finish. It is remanufactured, and its country of origin is Mexico.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review