Nugeon Disc Brake Caliper P/N:99-17291A
Nugeon 99-17885B rear left brake caliper for the 2000-2005 Ford Excursion and other vehicles squeezes the brake pads against the rotor to slow the wheel. This Nugeon brake caliper is remanufactured.
A rear brake that drags, a pull to one side, uneven pad wear or brake fluid around the caliper can point to a worn or sticking caliper. These signs alone do not prove the caliper is the problem; a collapsed brake hose is another common cause.
It fits the 2000-2005 Ford Excursion, the 2000-2004 Ford F-250 Super Duty and the 2000-2004 Ford F-350 Super Duty. This listing is one caliper for the rear left wheel; the rear right is a separate part, ordered separately, and both sides are normally replaced together.
Fit and size
Build and materials
One rear left remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, the mounting bolt and the bracket mounting bolts are not included, so plan on new bolts rather than reusing the old ones.
Where do these 2000-2005 Ford Excursion calipers go on the vehicle?
Nugeon 99-17885B is the rear left caliper and fits the 2000-2005 Ford Excursion. The rear right side takes its own caliper, ordered separately.
Is this a brake caliper for the 2000-2004 Ford F-250 Super Duty?
Yes. Nugeon 99-17885B fits the 2000-2004 Ford F-250 Super Duty, and this side takes one caliper on the rear left.
Does this disc brake caliper come with the bracket and hardware?
Yes. It includes the bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads and the bracket mounting bolts are not included.
Are the pistons on this Nugeon caliper phenolic?
Yes. This floating caliper has two phenolic pistons with a 44 mm (1.732 in) piston diameter, in a cast iron casting.
What threads do the inlet and bleeder use on this rear left caliper?
The banjo bolt inlet uses a 3/8-24 thread, and the bleeder screw thread is M10-1.0. The bleeder screw is included, but its cap is not.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.