Nugeon 99-17961B front right brake caliper for the 2008-2011 Ford Focus clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, pushes its piston out under brake fluid pressure.
- Floating caliper with a single 57 mm phenolic piston
- Aluminum casting with a rust-preventative finish
- Banjo bolt inlet fitting with an M10-1.5 port thread
Quick facts
- Part: Nugeon 99-17961B brake caliper
- Also called: disc brake caliper
- Fits: 2008-2011 Ford Focus
- Position: Front right
- Material: Aluminum
- Condition: Remanufactured
A sticking caliper can drag, pull the car to one side or wear one pad faster, and a wet piston boot can point to a fluid leak. Before you replace the caliper, rule out worn pads, a collapsed brake hose and dirty slides, which can also make a car pull or drag.
Fits
It is a direct-fit replacement for the 2008-2011 Ford Focus.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 (this side)
- Piston diameter: 57 mm (2.244 in)
- Piston quantity: 1
- Inlet fitting: Banjo bolt
- Inlet port thread: M10-1.5 x 26.92 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Piston material: Phenolic
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured front right brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, bracket mounting bolts and caliper and pad hardware are not included, so plan on new bolts, since the old ones may not be reusable. This listing holds one caliper and the front right takes one; the front left is a separate part, normally replaced along with it.
Frequently Asked Questions
Is this a brake caliper for the 2008-2011 Ford Focus front right wheel?
Yes. Nugeon 99-17961B is made for the front right of the 2008-2011 Ford Focus. The front left side needs its own caliper, ordered separately.
Does this Nugeon caliper come with brake pads?
No. Nugeon 99-17961B comes with its mounting bracket, slides, dust boots, bleeder screw and crush washer, but not brake pads, anti-squeal shims, wear sensors or bracket bolts.
What thread sizes does this front right caliper use?
The banjo bolt inlet port is M10-1.5 x 26.92 mm, and the bleeder screw thread is M10-1.0. The single piston is 57 mm (2.244 in) across.
How can I tell if a front right caliper is sticking?
A sticking caliper can show up as drag, pulling toward one side or one pad wearing faster than the other. Have the brakes inspected promptly, since a shop can test the caliper safely.
Is the Nugeon 99-17961B caliper remanufactured, and where is it made?
Yes. Nugeon 99-17961B is a remanufactured front right caliper with an aluminum casting, and its country of origin is Mexico.
