Rear Right Brake Caliper for 2012-2018 Ford Focus & More - Nugeon 99-17977B

Be the first to review this product
$189.99
WARNING:California Proposition 65▾
MPN: 99-17977B
Item Package Code: EA
Part Has Core (Y/N): N
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Nugeon Disc Brake Caliper P/N:99-17977B
Nugeon Disc Brake Caliper P/N:99-17977B
$189.99

Nugeon 99-17977B rear right brake caliper for the 2012-2018 Ford Focus and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon caliper, also called a disc brake caliper, mounts at the rear right wheel.

  • Floating caliper with a single steel piston, 37.9 mm (1.49 in) in diameter
  • Aluminum caliper casting with a rust-preventative finish
  • Mounting bracket, caliper slides and dust boots included

Quick facts

  • Part: Nugeon 99-17977B brake caliper
  • Also called: disc brake caliper
  • Fits: 2012-2018 Ford Focus and other vehicles
  • Position: Rear right
  • Material: Aluminum caliper casting, steel piston
  • Condition: Remanufactured

A pull to one side under braking, brake fluid leaking at the wheel or one pad wearing faster than the other can mean this caliper is worn. A brake hose or the pads can be behind the same signs, so pin down the cause before you replace the caliper.

Fits

For the 2012-2018 Ford Focus, this brake caliper is a direct-fit replacement, and it fits the 2018-2022 Ford EcoSport as well. This listing is one caliper for the rear right; the rear left is a separate part, and the two sides are normally replaced together. At the rear right, the 2012-2018 Ford Focus takes one caliper.

Specifications

Fit and size

  • Position: Rear right
  • Sold as: one caliper per listing
  • Piston outside diameter: 37.9 mm (1.49 in)
  • Piston quantity: 1
  • Bleeder screw thread: M10-1.0
  • Inlet port thread: M10-1.0, line fitting

Build and materials

  • Caliper type: Floating
  • Condition: Remanufactured
  • Caliper casting material: Aluminum
  • Piston material: Steel
  • Finish: Rust preventative
  • Country of origin: Mexico

In the box

One caliper with its mounting bracket, caliper slides, dust boots, pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap and bracket mounting bolts are not included, so plan on new bolts because the old ones may not be reusable.

Interchange / FMSI:

FMSI: D1095

Frequently Asked Questions

Is this a brake caliper for the 2018-2022 Ford EcoSport?

Yes. Nugeon 99-17977B is a direct-fit rear right caliper for the 2018-2022 Ford EcoSport, and it fits the 2012-2018 Ford Focus as well.

Does the Nugeon brake caliper come with brake pads?

No. Nugeon 99-17977B comes with its bracket, slides, dust boots, pad hardware, bleeder screw and crush washers. Pads, anti-squeal shims and wear sensors are not included.

What thread does this caliper's bleeder screw use?

The bleeder screw is M10-1.0, and the inlet port for the brake line uses the same M10-1.0 thread.

Do I need new bolts for the caliper bracket?

Yes, plan on them. Nugeon 99-17977B does not include bracket mounting bolts, and the old ones may not be reusable.

Is this rear right caliper floating or fixed?

It is a floating caliper with one steel piston, 37.9 mm (1.49 in) in diameter.