Nugeon Disc Brake Caliper P/N:99-17883A
Nugeon 99-18030A front left brake caliper for the 2015-2025 Ford Transit-350 HD and other vehicles squeezes the brake pads against the rotor to slow the wheel. This is a remanufactured floating caliper.
A sticking or leaking caliper can show up as the vehicle pulling to one side, a pad worn more than the others, or brake fluid around the caliper. These signs alone do not prove the caliper is the problem, since uneven tire pressure can also make a vehicle pull.
The same caliper fits the 2015-2019 Ford Transit-350. On both the 2015-2025 Ford Transit-350 HD and the 2015-2019 Ford Transit-350, the front left position takes one caliper. This listing is one caliper for the front left; the front right is a separate part ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One caliper with its mounting bracket, slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. Brake pads, wear sensors, anti-squeal shims and the bracket mounting bolts are not included, so plan on new mounting bolts rather than reusing the old ones.
Interchange / FMSI:
FMSI: D1774
Does the Nugeon brake caliper 99-18030A fit the 2015-2025 Ford Transit-350 HD?
Yes. Nugeon 99-18030A is the front left caliper for the 2015-2025 Ford Transit-350 HD and also fits the 2015-2019 Ford Transit-350. The front right side is a separate part.
Does this remanufactured front left caliper come with brake pads?
No. Brake pads, wear sensors and anti-squeal shims are not included. The bracket, slides, dust boots, hardware, bleeder screw with cap and crush washers are.
What size are the pistons on this Nugeon caliper?
The Nugeon 99-18030A has two steel pistons, each 48 mm (1.89 in) across, in a floating cast iron caliper.
What are the signs of a sticking disc brake caliper?
A sticking caliper can show as the vehicle pulling to one side, a pad worn more than the others, or brake fluid around the caliper. A shop can confirm the cause.
What thread do the bleeder screw and inlet use on this caliper?
The bleeder screw and the banjo bolt inlet port both use an M10-1.0 thread on part 99-18030A. The bleeder screw and its cap are included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.