Rear Left Brake Caliper for 1992-2000 Honda Civic & More - TERREPOWER 99P00927B
TERREPOWER 99P00927B rear left brake caliper for the 1992-2000 Honda Civic and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper replaces a worn caliper at the rear left wheel.
- Floating caliper with one 30 mm steel piston
- Cast iron caliper with an E-coated finish
- Banjo bolt inlet fitting with an M10 - 1.0 thread
- Bleeder screw with an M10-1.25 thread
Quick facts
- Part: TERREPOWER 99P00927B brake caliper
- Also called: disc brake caliper
- Fits: 1992-2000 Honda Civic and other vehicles
- Position: Rear left
- Material: Cast iron
- Condition: Remanufactured
A worn caliper can show up as the car pulling to one side, a dragging wheel or brake fluid near the dust boot. These signs can mean the caliper is worn, though a collapsed brake hose or worn pads can also be behind them.
Fits
As a Civic rear caliper it covers the 1992-2000 model years, and it also fits the 1994-2001 Acura Integra and the 1993-1997 Honda Civic Del Sol. The rear right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1
- Piston quantity: 1
- Piston outside diameter: 30 mm (1.18 in)
- Bleeder screw thread: M10-1.25
- Inlet fitting: Banjo bolt, M10 - 1.0 thread
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: E-coated
- Condition: Remanufactured
- Caliper manufacturer: Nissin
- Country of origin: Mexico
In the box
One caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. This listing holds one caliper, and the rear left takes one. Brake pads, anti-squeal shims, wear sensors, bracket mounting bolts and mounting bolts are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D374
Frequently Asked Questions
Is this the right Honda Civic caliper for a 1992-2000 model?
Yes. TERREPOWER 99P00927B fits the 1992-2000 Honda Civic at the rear left wheel. The rear right side takes its own caliper.
Is this an Acura Integra brake caliper for the 1994-2001 model years?
Yes. This rear left caliper fits the 1994-2001 Acura Integra, and the vehicle takes one caliper for that wheel position.
Are brake pads and the caliper bracket included with this caliper?
TERREPOWER 99P00927B comes with the mounting bracket, slides, dust boots, hardware and a bleeder screw. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included.
What size is the piston and bleeder screw thread on this caliper?
The single steel piston is 30 mm (1.18 in) across, and the bleeder screw thread is M10-1.25. The banjo bolt inlet uses an M10 - 1.0 thread.
Is this a floating or fixed caliper, and what is it made of?
This rear left caliper is a floating type made of cast iron with an E-coated finish. Its piston is steel.
Write a Review