TERREPOWER 99P01861B rear left brake caliper for the 2014-2016 Kia Optima squeezes the brake pads against the rotor to slow the wheel. This remanufactured caliper works by brake fluid pressure acting on its piston.
- Floating design with one steel piston, 38 mm in diameter
- Aluminum casting with an E-coated finish
- Banjo inlet fitting with an M10-1.0 thread
- Bleeder screw with an M10-1.0 thread
Quick facts
- Part: TERREPOWER 99P01861B brake caliper
- Also called: disc brake caliper
- Fits: 2014-2016 Kia Optima
- Position: Rear left
- Material: Aluminum (caliper casting), steel (piston)
- Condition: Remanufactured
A sticking or leaking caliper can show up as the car pulling to one side, uneven pad wear or brake fluid around the caliper. Before you replace the caliper, rule out a worn brake hose or a seized slide pin, since either can produce similar symptoms; a shop can test both.
Fits
This direct-fit replacement suits the 2014-2016 Kia Optima, which takes one caliper at the rear left. This listing is a single disc brake caliper; the rear right is its own part, ordered separately, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston diameter: 38 mm (1.5 in)
- Piston quantity: 1
- Inlet fitting: banjo, M10-1.0 thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Piston material: Steel
- Finish: E-coated
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the mounting bolts, including those for the bracket, are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1544
Frequently Asked Questions
Is the TERREPOWER 99P01861B the right rear left caliper for the 2014-2016 Kia Optima?
Yes. TERREPOWER 99P01861B is the rear left caliper for the 2014-2016 Kia Optima. The rear right side is a separate part.
Does this remanufactured caliper come with its bracket and slides?
Yes. This caliper includes the bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Pads, shims, wear sensors and mounting bolts are not included.
What piston size and banjo thread does this floating caliper have?
TERREPOWER 99P01861B has a single steel piston 38 mm (1.5 in) across, and its banjo inlet has an M10-1.0 thread.
Can a sticking rear left caliper make the car pull to one side?
Yes, it can. Uneven pad wear or fluid around the caliper are other possible signs. Since this is a brake part, have it inspected promptly.
What is the TERREPOWER 99P01861B caliper housing made of?
The housing is an aluminum casting with an E-coated finish, and the piston is steel. This is a floating caliper.
