TERREPOWER 99P17735B front brake caliper for the 2007-2017 Jeep Wrangler and other vehicles squeezes the pads against the rotor to slow the wheel. This is a remanufactured caliper, listed for both the front right and front left positions.
- Floating caliper design with a single 66 mm phenolic piston
- Cast iron casting with a gray E-coated finish
- Banjo bolt inlet with an M10-1.0 x 23.4 mm port thread
- Bleeder screw with M10-1.0 thread
Quick facts
- Part: TERREPOWER 99P17735B brake caliper
- Also called: disc brake caliper
- Fits: 2007-2017 Jeep Wrangler and other vehicles
- Position: Front right, front left
- Material: Cast iron casting, phenolic piston
- Condition: Remanufactured
A caliper that sticks or leaks can show up as the car pulling to one side under braking, pads that wear unevenly, or fluid around the piston boot. Those signs can mean this caliper is worn, though the brake hose or the rotor can be behind them too, so find the cause before replacing it.
Fits
It is listed for a wide range of Chrysler, Dodge, Jeep, Ram and Volkswagen models, including the 2008-2016 Dodge Grand Caravan and the 2008-2016 Chrysler Town & Country, with one caliper per application. Calipers are normally replaced in pairs across an axle, and this listing is one caliper sold individually. Driving something else? Look up your year, make and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front right, front left
- Quantity per application: 1
- Piston diameter: 66 mm (2.598 in)
- Piston quantity: 1
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Casting material: cast iron
- Piston material: phenolic
- Finish: E-coated
- Inlet fitting: banjo bolt
- Housing cast number: 16018401
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Pads, anti-squeal shims, the bleeder screw cap, bracket mounting bolts, a mounting bolt, caliper and pad hardware and wear sensors are not included, so plan on new bolts; the old ones may not be reusable.
Frequently Asked Questions
Is this the brake caliper for a 2007-2017 Jeep Wrangler?
Yes. TERREPOWER 99P17735B is a front brake caliper listed for the 2007-2017 Jeep Wrangler, with one caliper per application. For other vehicles, look up your year, make and model in the "Vehicles it fits" section.
Does this disc brake caliper come with the bracket and bleeder screw?
Yes. The TERREPOWER 99P17735B includes the bracket, slides, dust boots, bleeder screw and crush washers. Pads, shims, the bleeder screw cap, bracket mounting bolts and pad hardware are not included.
How big is the piston on this floating brake caliper?
The single piston is 66 mm (2.598 in) across and made of phenolic. The caliper is a floating design.
Does the inlet on this front caliper take a banjo bolt?
Yes. The inlet is a banjo bolt type with an M10-1.0 x 23.4 mm port thread, and crush washers are included. The bleeder screw thread is M10-1.0.
What can a sticking or leaking front caliper look like?
A pull to one side when braking, pads worn unevenly, or fluid around the piston boot can point to a caliper problem. Brakes are a safety system, so have them inspected promptly rather than driving on.
