Standard Ignition Park Assist Camera P/N:PAC280
STANDARD IGN PARTS PAC162 rear park assist camera for the 2016-2018 Lincoln MKX shows the driver the area behind the vehicle while backing up.
A blank, distorted or flickering rear image can mean the camera has failed, though a dirty lens or a damaged connector can give a similar picture. With the engine off, look over the lens for dirt, cracks or moisture and the connector for damage before replacing the camera. A shop can test the wiring and display.
This is a direct-fit OE replacement for the 2016-2018 Lincoln MKX, which takes one rear camera.
Fit and size
Build and materials
One park assist camera. A mounting bracket and a storage case are not included.
Interchange: 864-049
PAN162 · PACA44 · PAW162 · F2GZ19G490C
This part cross-references / interchanges with the following part numbers:
Is the STANDARD IGN PARTS PAC162 park assist camera right for the 2016-2018 Lincoln MKX?
Yes. The PAC162 is a direct-fit rear park assist camera for the 2016-2018 Lincoln MKX, which takes one.
Does the PAC162 rear park assist camera need programming?
No. It has a plug-and-play design, so no programming is required after it is connected.
Does this park assist camera come with a mounting bracket?
No. A mounting bracket is not included, and neither is a storage case. The listing is one camera.
What kind of connector does this rear park assist camera have?
STANDARD IGN PARTS PAC162 has one female plug connector with six male pin terminals.
Does the PAC162 camera replace the F2GZ19G490C number?
Yes. F2GZ19G490C is one of the numbers this STANDARD IGN PARTS PAC162 park assist camera replaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.